canfieldconnector

M5 Male DIN 43650 form A for molding

canfieldconnector — Fri, 24 Feb 2012 16:37:15 +0000

: M5_DIN 43650 Form A for Molding

This male DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connector can be integrated in tooling to provide a cost effective quick connect electrical interface. The P10020 is designed to mate with Series 5000 or other DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 female electrical connectors.

Features:

Rugged design, Made in USA
DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 configuration
2+ or 3+ Ground versions
250V AC/DC max.
Glass Fiber Reinforced Nylon
10 Amps max. rating
Temp. rating -40° to +125° C

Tagged: connectors, DIN 43650, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, DIN43650, IP67, ISO, ISO 4400, molded, surge suppression, washdown resistant

CanTop Wire Strain Reliefs

canfieldconnector — Mon, 02 Jan 2012 03:01:04 +0000

Offered in Plastic and metal versions, the Canfield Connector CanTop Strain Reliefs are a high quality, low cost way to manage your power and data cables through bulkheads and panels.

Tagged: Graingers, Heyco, Hubbel, Hummel Fittings, metal cable glands, Nylon Cable Glands, Olflex, Sealcon, strain relief grommet, Wire Strain Relief, Wiring accessories

NEW! Sales tool for our ILW lighted gasket

canfieldconnector — Fri, 04 Nov 2011 18:59:29 +0000

The CanCon ILW being shown on our new sales tool the PST-ILW-001.

Tagged: DIN 43650, DIN 43650 Form "A", DIN43650, IP67, ISO 4400, NEMA 6, Peters Induprodukt, PG9, quick connect, Staiger, washdown resistant

Sensors E-Newsletter

canfieldconnector — Tue, 12 Jul 2011 14:28:04 +0000

Sensors, Electrical Connectors, Timers & Accessories eNews
Looking for Magnetic Proximity Sensors for Linear
Actuators?

Read e-mailing

Tagged: 8mm quick connect, Linear Actuator, magnetic proximity sensor, Magnetic Sensor, male pigtail, NEMA 6, pneumatic cylinder, PNP, Reed sensor, Reed Switch, Rotomation, round cylinder, sinking, solid-state, sourcing, Strain Relief, Sub-Micro, surge suppression, tie rod cylinders, tie-rod

Social Media

canfieldconnector — Tue, 05 Jul 2011 17:53:39 +0000

We can been seen on:

Tagged: Brad Harrison, DIN43650, Heyco, Hubbell, MPM, Sealcon, Shield, Turck

Canfield Connector All Associates Meeting June 30, 2011

canfieldconnector — Thu, 30 Jun 2011 19:54:32 +0000

Canfield Connector Staff June 30, 2011

On June 30, 2011 Canfield Connector personnel that have proven their loyalty through service, where shown appreciation through individual recognition and gifts for years of service.

Honored were the following:

Thomas Golec, Paul Sneddon and Amy Stivers for 5 years of service

Raymond Barb Jr., Shea McKelvey for 10 years of service

James Kollar for 15 years of Service

Joyce Green, Thomas Hensperger and Patricia Smith for 20 years Service

Robert Howard for 25 years.

A pizza party was thrown for all with the ceremony afterwards followed by a brief dicussion about the status of the company.

Tagged: Awards, Canfield Connector employees, DIN, DIN 43650, DIN 43650 Form "A", service

Series 9T Reed & Electronic Sensors

canfieldconnector — Wed, 04 May 2011 15:25:33 +0000

The Canfield Connector Series 9T is a compact yet robust switch used to sense position of magnetic pistons designed into aluminum extrusion type linear actuators. The 9T fits a 7.2mm X 3.9mm rectangular groove which is designed into the actuator body. Available in reed or electronic versions, the 9T features standard 9 ft. PVC or 8mm quick connect male pigtail, and are rated IP-67 against the ingress of dust and water.

Tagged: 7.2mm T slot, 8mm quick connect, IP67, Linear Actuator, Magnetic Sensor, male pigtail, NEMA 6, NPN, parallel, PNP, Reed sensor, Reed Switch, sinking, SMC, sourcing, washdown resistant

Series 9Q Reed & Electronic Sensors

canfieldconnector — Wed, 04 May 2011 15:23:13 +0000

The Canfield Connector Series 9Q is a magnetic proximity switch that is engineered to fit into extruded actuators that are made with a “T” slot. The unique design of the 9Q enables it to be installed anywhere along the slot and assembled in place without taking off the actuator end-cap. The rugged polyurethane encapsulated switch features an innovative design that incorporates a hard nylon shell. The switches are available in reed or electronic sensing and feature surge suppression and on board indicator light standard. Offered as a flying lead or 8mm quick connect, the sensors are quickly and easily wired in to any application. The sensors meet NEMA 6 / IP67 environmental specifications and are corrosion and wash-down compatible. This sensor is proudly made in the USA.

Tagged: 8mm quick connect, electronic sensor, Intrinsically safe, IP67, male pigtail, NEMA 6, NPN, parallel, Parker, PNP, polyurethane encapsulation, Reed sensor, Reed Switch, sinking, sourcing, surge suppression, universal T slot, washdown resistant

Series 9N Reed & Electronic Sensors

canfieldconnector — Wed, 04 May 2011 15:16:28 +0000

The Canfield Connector 9N is a right angle version of the popular 4.25mm round groove type switches commonly used in aluminum extrusion type linear actuators. The 9N features reed or electronic versions and are available in standard 9 ft. PVC or 8mm quick connect male pigtail. The 9N is IP-67 which makes it dust tight and water resistant.

Tagged: 8mm quick connect, corrosion resistant, electronic sensor, IP67, male pigtail, NEMA6, NPN, parallel, PNP, Reed sensor, Reed Switch, round groove, SMC, washdown resistant

9M50 Magnetic Proximity Switch

canfieldconnector — Wed, 04 May 2011 15:12:59 +0000

The Canfield Connector 9M50 is a compact full featured magnetic proximity switch designed to fit a “D” shaped groove detail designed into linear actuators. The innovative design allows the switch to be inserted anywhere along the linear actuator and then rotated and locked into position. When installed the switch lies flat against the cylinder housing and does not protrude beyond the cylinder face making installations neat and clean. The fully encapsulated switch is offered in reed, and electronic styles in either NPN or PNP. The robust epoxy encapsulated design meets IP67, NEMA 6 environmental protection. Voltage ranges are available from 5 to 120 VAC/DC in multiple versions. Maximum current draw is 200 mA. Standard connection is provided by a 9 ft. PVC or 8mm quick connect male pigtail.

Tagged: 6.5mm groove, 8mm quick connect, electronic sensor, Intrinsically safe, IP67, magnetic proximity switch, male pigtail, NEMA 6, Norgren, normally closed, NPN, parallel, PNP, Reed sensor, Reed Switch