M5 Male DIN 43650 form A for molding

M5_DIN 43650 Form A for Molding

 

 

 

 

 

 

 

 

 

This male DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connector can be integrated in tooling to provide a cost effective quick connect electrical interface.  The P10020 is designed to mate with Series 5000 or other DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 female electrical connectors.

Features:

• Rugged design, Made in USA
• DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 configuration
• 2+ or 3+ Ground versions
• 250V AC/DC max.
• Glass Fiber Reinforced Nylon
• 10 Amps max. rating
• Temp. rating -40° to +125° C

Series 5FR all molded DIN solenoid valve connectors

The Canfield Series 5FR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5FR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile ”straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features bi-directional indicator lights, and load suppression (not intended for UL 1449). The Series 5FR is Proudly Made in the U.S.A

Canfield Series 5F Molded Connector

The Canfield Series 5F all-molded DINsolenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA6 rating and makes it impossible to lose the gasket. The 5F and 5J are the only molded valve connectors in the industry that feature a HARDUSAGEcord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSAversions are available as well. Canfield offers any version of the 5F connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request.

 

Canfield Connector Multi-Pin Molded Connector Series

Canfield Connector’s M8 and M12 multi-pin molded connector series for sensors and automation both have a nylon housing, black PUR or PVC cable, and are IP67 environmentally resistant. Features of the M8, Pico, include:

• A straight locking connector with 3 or 4 poles.
• A nominal voltage rating of 120 V AC/DC.
• A current rating of 4 amps.
• A 24 AWG wire gauge.
• A temperature rating of -25° to +85°C.

The M12, Micro, features include:

• A straight or 90° locking connector with 3, 4, or 5 poles.
• A nominal voltage rating of 240 V AC/DC with a 4 amp current rating (3 and 4 pole versions) or 120 V AC/DC with a 3 amp current rating (5 pole version).
• A temperature rating of -25° to +85°C.