Monthly Archives: April 2015

Series 5000 Rectified DIN 43650 Solenoid Valve Connector

Canfield Connector’s R5000 Series solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connectors.  This standard permits industry interchange-ability and has been embraced by the solenoid valve industry worldwide.  The R5000 converts alternating current to direct current reducing coil burnout due to valve sticking.  Also, direct current eliminates AC “hum” inherent to alternating current.  Features include the ability for the user to wire the connector into existing installations.  Wire connections are made inside the connector housing and the wire inlet is either PG9 strain relief, 3/8″ or 1/2″ conduit.  The R5000 has a maximum current rating of 1 Amp continuous with maximum wire gauge diameter of 14 AWG.  An indicator light is offered for instant diagnostics and to aid setup and installation.

See more at:

http://www.canfieldconnector.com/products/series/3036/r5000-din43650-rectified-solenoid-valve-connector


8E Low Current Reed Switch

The Canfield Connector Series 8E is a linear actuator magnetic sensor designed for harsh industrial applications. With mounting styles for tie rod or round type linear actuators, the 8E features an all encapsulated body that is covered by a metal housing for strength. The switch is available in reed or electronic versions and electrical connection is made by use of 9 ft. PVC or 8mm quick connect male pigtail. The 8E is water resistant and dust tight to IP67.

See more at:

http://www.canfieldconnector.com/products/series/3009/8e-reed-electronic-magnetic-proximity-sensor