Category Archives: Cable Gland

5JMSD – In-line Micro Solenoid Driver Molded Connectors

The Canfield Connector Series 5JMSD is a solenoid driver circuit (Coil Saver) tucked away in our all new in-line electronics package coupled with our 5J all-molded DIN solenoid valve connector/gasket/cord assembly for DIN 43650 Form A, Industry and Form C Solenoid Valve Connectors (EN 175301-803-2000 ). The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The Coil Saver enhances solenoid valve function as it lowers the wattage of solenoid operators of solenoid valves as it first applies a full voltage to ensure strong pull-in then drops the current when the solenoid magnetic circuit is most efficient and lowers wattage during long term energization or repeated cycles and lower RMS wattage. Both the in-line Coil Saver package and the 5J are fully encapsulated enclosures. This design allows for the Coil Saver to be isolated from the heat of the solenoid as well as installed upstream, away from the coil connector that is designed for this heat.  The DC voltage version is 46mm by 15mm cylinder and is IP68 fully sealed from dust and water ingress.  The in-line package can control input DC voltage and supplies PWM DC to the coil. The Series 5JMSD is Proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3060/5jmsd—in-line-micro-solenoid-driver-molded-connectors

 

5jmsd_solenoid_driver_molded_connector_photor00


Nylon Flex Strain Relief Cord Grips

Canfield Connector’s Nylon Flex Strain Relief CanTop Connectors are a series of wire bulkhead feed through connectors which have integrated wire strain relief and sealing mechanism.  These CanTops are made from rugged engineered materials which are impervious to dust and moisture.  Available in various NPT, PG, and metric thread sizes and in Gray or Black Nylon.  These CanTops are compatible with wire diameters from .079” to .709” to ensure a tight fit while enhancing any wire installation.

See more at: http://www.canfieldconnector.com/products/series/3047/nylon-flex-strain-relief-cord-grips

Download our free Canfield Connector app on any iOS or Android device!

cantop_flex_photo


Solenoid Valve Connector Series 5F

The Canfield Series 5F all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5F and 5J are the only molded valve connectors in the industry that feature a HARD USAGE cord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield offers any version of the 5F connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request. The Series 5F is Proudly Made in the U.S.A.

Watch our YouTube video to see how they work! https://www.youtube.com/watch?v=Q3b4_ZP07yQ

See more at:  http://www.canfieldconnector.com/products/series/3001/5f-molded-din-connectors

And download our free app on any iOS or Android device!

5f_molded_connector_photo


Stainless Steel Strain Relief

Canfield Connector’s Stainless Steel Strain Relief CanTop Connectors are a series of wire bulkhead feed through connectors which have integrated wire strain relief and sealing mechanism.  These CanTops are made from rugged engineered materials which are impervious to dust and moisture.  Available in various NPT, PG thread sizes.  These CanTops are compatible with wire diameters from .079” to 1.732” to ensure a tight fit while enhancing any wire installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3063/strain-relief-cantop-bulkhead-connector-cord-grip

Or download our free app on any iOS or Android device:  https://itunes.apple.com/us/app/canfield-connector-mobile/id1167616267?ls=1&mt=8

https://play.google.com/store/apps/details?id=com.canfieldindustries.canfieldconnector&hl=en

 

cantop_ss_strainrelief_photo

 


Nylon Strain Relief Cord Grip CanTops

Canfield Connector’s Nylon Strain Relief CanTop  Connectors are a series of wire bulkhead feed through connectors which have integrated wire strain relief and sealing mechanism.  These CanTops are made from rugged engineered materials which are impervious to dust and moisture.  Available in various NPT, PG, and metric thread sizes and in Gray or Black Nylon.  These CanTops are compatible with wire diameters from .079” to 1.732”, to ensure a tight fit while enhancing any wire installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3045/cantop-strain-relief-connector-cord-grips

cantop_nylon_strainrelief_photo


Need Canfield Connector Literature?

Download the full catalog at http://www.canfieldconnector.com/DownloadCatalogs.aspx


CanTop Wire Strain Relief Cord Grips and Cable Glands

The Canfield Connector CanTop (brand) is a series of wire bulkhead feed through connectors which have integrated wire strain relief and sealing mechanism.  The CanTops are made from rugged engineered materials which are impervious to dust and moisture.  Available in Nickel Plated Brass Strain Relief, Nylon Strain Relief, and Nylon Flex Strain Relief versions with various NPT, PG, and metric thread sizes. Canfield Connector CanTops are compatible with wire diameters from .079″ to 1.732″ (.709″ for Flex), to ensure a tight fit while enhancing any wire installation..

See more at:

http://www.canfieldconnector.com/products/category/68/cantop-strain-relief-wire-cord-grips