Category Archives: magnetic cylinder sensor

Series CS Cylindrical Threaded Mount Sensor

The Canfield Connector Series CS Cylindrical Threaded Mount Sensor is a rugged and compact magnetic sensor set within a miniature encapsulated Stainless Steel M8 threaded housing.  Available in reed or electronic sensing, the CS sensor can sense magnets or magnetic objects in industrial machinery and mobile equipment.  Typically used where greater sensing distance is required, the CS sensor changes state in the presence of a magnetic field.  Electrical output for the CS is normally open, with sinking or sourcing outputs for the electronic versions.  Input voltages available are 0 to 120 VAC/DC .5 Amp maximum for the reed and 5-24 VDC 0.2 Amp maximum for the electronic versions.  The sensor is made of a Stainless Steel  body, TPU encapsulant and has PVC wire standard and is NEMA 6.  Temperature ranges are -20° to 80°C.  The CS Series is proudly made in the U.S.A.

 

See more at:  http://www.canfieldconnector.com/products/category/82/all-threaded-magnetic-sensors

 

Download our free app on any iOS or Android device!

 

All_Threaded_Magnetic_Sensor_R00


9D – Fabco, Numatics, Rotomation Grooves

The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3014/9d-reed-electronic-cylinder-proximity-sensor

 

9d_sensor_photo


Series 7C Hugh Current Proximity Sensor

The Canfield Series 7C proximity sensors are used to sense position on pneumatic actuators equipped with magnetic pistons from 2″ to 8″ bore. This proven design is rugged yet cost effective. All switches feature a self-adjusting clamp that grips standard NFPA and custom cylinders eliminating stocking requirements of many clamps for different bore sizes. The Series 7C boasts the largest number of custom circuits to match applications found in the market. Examples include; 1 or 4 Amp reed switches, normally open, normally closed or SPDT switch types, reed or electronic sensing elements in the same package style, not to mention the industry’s first 120 VAC Hall sensor. The low cost 7C features a ½” conduit hub and wire lead to meet stringent electrical codes in certain regions and applications.

See more at:  http://www.canfieldconnector.com/products/series/3004/7c-reed-electronic-cylinder-proximity-sensor

Download our free app on any iOS or Android device!

7c_sensor_photo


Series 8F Magnetic Reed Type Proximity Sensor

The Canfield Connector Series 8F is a compact yet rugged magnetic reed type proximity sensor designed for rigorous applications where critical magnetic sensing is needed. The tough nylon shell is over-molded with polyurethane to create an environmentally resilient seal from the elements and is rated to IP67. The compact size and cylindrical shape are ideal for mounting in a simple hole or cylindrical shape. There is a tab mounting version also available. The 8F can be mounted solidly and fit into many common magnetic sensing applications. Offered standard with 9ft. cord or an M8 quick connect connector, the switch is also available in either normally open or normally closed switch types.

See more at:  http://www.canfieldconnector.com/products/series/3010/8f-reed-cylinder-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

8f_sensor_photo


Series 8E Low Current Magnetic Sensor

The Canfield Connector Series 8E is a linear actuator magnetic sensor designed for harsh industrial applications. With mounting styles for tie rod or round type linear actuators, the 8E features an all encapsulated body that is covered by a metal housing for strength. The switch is available in reed or electronic versions and electrical connection is made by use of 9 ft. PVC or 8mm quick connect male pigtail. The 8E is water resistant and dust tight to IP67.

See more at:  http://www.canfieldconnector.com/products/series/3009/8e-reed-electronic-magnetic-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

8e_sensor_photo


Series 9Q Magnetic Proximity Switch

The Canfield Connector Series 9Q is a magnetic proximity switch that is engineered to fit into extruded actuators that are made with a “T” slot. The unique design of the 9Q enables it to be installed anywhere along the slot and assembled in place without taking off the actuator end-cap. The rugged polyurethane encapsulated switch features an innovative design that incorporates a hard nylon shell. The switches are available in reed or electronic sensing and feature surge suppression and on board indicator light standard. Offered as a flying lead or 8mm quick connect, the sensors are quickly and easily wired in to any application. The sensors meet NEMA 6 / IP67 environmental specifications and are corrosion and wash-down compatible. This sensor is proudly made in the USA.

See more at: http://www.canfieldconnector.com/products/series/3022/9q-reed-electronic-cylinder-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

9q_sensor_photo


Canfield Connector Series 7000 – High Current Reed Switch

The Canfield Series 7000 proximity sensors are used to sense position on cylinders. They accommodate 2 to 8 inch bore tie rod cylinders or 3/4 to 4 inch round cylinders. This proven design is rugged yet cost effective. The Series 7000 boasts the largest number of custom circuits to match applications found in the market. Examples include; 1 or 4 Amp reed switches, normally open, normally closed or SPDT switch types, reed or electronic sensing elements in the same package style, and the industry’s first 120 VAC Hall sensor. Awide range of enclosures and connector options are available. To reduce stocking requirements, two clamp options feature a self-adjusting clamp for NFPA and other tie rod cylinders from 2 to 8 inch bore. Another clamp option features a band clamp from 3/4 to 4 inch round cylinders.

See more at:  http://www.canfieldconnector.com/products/series/3002/7000-reed-electronic-proximity-sensors

And download our free app on any iOS or Android device!

7000_sensor_photo