Tag Archives: 1/2″ conduit

Series 7C Hugh Current Proximity Sensor

The Canfield Series 7C proximity sensors are used to sense position on pneumatic actuators equipped with magnetic pistons from 2″ to 8″ bore. This proven design is rugged yet cost effective. All switches feature a self-adjusting clamp that grips standard NFPA and custom cylinders eliminating stocking requirements of many clamps for different bore sizes. The Series 7C boasts the largest number of custom circuits to match applications found in the market. Examples include; 1 or 4 Amp reed switches, normally open, normally closed or SPDT switch types, reed or electronic sensing elements in the same package style, not to mention the industry’s first 120 VAC Hall sensor. The low cost 7C features a ½” conduit hub and wire lead to meet stringent electrical codes in certain regions and applications.

See more at:  http://www.canfieldconnector.com/products/series/3004/7c-reed-electronic-cylinder-proximity-sensor

Download our free app on any iOS or Android device!

7c_sensor_photo


Sandwich CRT – Condensation Removal Timer

This Canfield Connector miniature timer makes any valve, with the DIN 43650 Form “A”/ISO 4400, EN175301-803:2000 electrical interface, able to operate as a compressed air system condensate removal valve. The unit installs in a modular form between an existing coil and connector. No new wiring is necessary. Retrofits on virtually any installation. It works with the valve brand of your choice. The cycle and on times are easily adjustable and two indicator lights show status.

See more at:  http://www.canfieldconnector.com/products/series/3028/sandwich-crt

Download our free app on any iOS or Android device!

sandcrt_condensation_timer_photo


Canfield Connector Field Wire DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2006 Female Electrical Connectors for Solenoid valves that are designed to be hand wired at the site of assembly using customer wire.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/62/field-wire-din-43650-solenoid-valve-connectors

Download our free app on any iOS or Android device!

fieldwire_connector_group


Need Canfield Connector Literature?

Download the full catalog at http://www.canfieldconnector.com/DownloadCatalogs.aspx


Series P5600 DIN 43650 Micro Protective Connectors

The Micro Protective Connectors are available in standard MINI, DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 and Sub-Micro 8mm and 9.4mm. The Canfield Connector MPCs provide electrical controllers surge suppression against voltage spikes caused by the solenoids used on hydraulic and pneumatic solenoid valves.


Series R5000 solenoid valve connector

Canfield Connector’s R5000 Series solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connectors. This standard permits industry interchange-ability and has been embraced by the solenoid valve industry worldwide. The R5000 converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Features include the ability for the user to wire the connector into existing installations. Wire connections are made inside the connector housing and the wire inlet is either PG9 strain relief, 3/8″ or 1/2″ conduit. The R5000 has a maximum current rating of 1 Amp continuous with maximum wire gauge diameter of 14 AWG. An indicator light is offered for instant diagnostics and to aid setup and installation.