Tag Archives: Compact Air
The Series 9C is a compact, universal, magnetically operated proximity switch commonly used on aluminum extruded profile type linear actuators equipped with magnetic pistons. The switches are available in both reed and electronic styles and made to fit into a 4mm key hole type slot. Position fixing is accomplished by means of a screw that is supplied in the switch body. The on board indicator light shows instant switch diagnostics to minimize downtime and facilitate installation and can be seen from wide angles. Available in the standard 9 ft. PVC wired or optional 8mm quick connect, the switch can handle AC or DC current in several configurations. The 9C is assembled in engineered polymers and designed to meet NEMA 6 / IP 67 environmental specifications.
Fits: Bimba, Compact Air, DE-STA-CO, Robohand, SMC cylinder grooves
See more at:
http://www.canfieldconnector.com/products/series/3013/9c-magnetic-cylinder-proximity-sensor
Leave a comment | tags: 8mm quick connect, Bimba, Compact Air, DE-STA-CO, electronic sensor, IP67, linear actuators, magnetic pistions, magnetic proximity sensor, magnetic proximity switch, NEMA 6, Reed sensor, Reed Switch, Robohand, SMC | posted in Magnetic Cylinder Proximity Sensors, magnetic cylinder sensor
Leave a comment | tags: 1/2", 1/2" conduit, 5F, 8F, 8mm 1/2" Conduit, 8mm quick connect, 8mm Strain Relief, 8wf, adjustable amplitude, adjustable current output, air dryers, aircraft aluminum, ASCO, Bimba, Block Micro Proportional Driver, CanTop, coil pin protector, Compact Air, Condensation Removal Timer, connector, connectors, Control current, control signal input, Control Voltage, conveyor automation, cord grip, crimping, crimping force sensor, cycle time, cycle timer, Cylinder Sensor, cylinders, DCP, DE-STA-CO, Delay On Make, differential pressure switch, Diffused Accumulation, diffused indexing, DIN, DIN 4360 Form "C", DIN 43650, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, DIN 43650 Form "C", DIN Form "C", DIN43650, Diode, dovetail, dual spade, electronic magnetic sensor, electronic sensor, EN175301, epoxy potted enclosure, extruded cylinder, Fabco, FAC, Fieldbus Adapber, Fieldbus Adapter, Flex, Flex Strain Relief Connector, flow control, force feedback, force sensor, Form A, Form B, Form C, full-wave bridge rectifier, Gemu, General Location, Goyen Valve, Hard Usage, hazardous location, Heyco, Hubbell, hydraulic coils, iLW, intercooler, Interval Delay, Intrinsically safe, IP 65, IP65, IP67, ISO, ISO 4400, ISO Male, LED, lighted, Linear Actuator, linear actuator switches, M12, M12 adapter, M12 connector, M8, magnetic, magnetic pistions, magnetic pistons, magnetic proximity sensor, magnetic proximity switch, Magnetic Sensor, Male Connector, male patch cord, male pigtail, Manual override, Micro Logic Timer, Micro Proportional Driver, Micro Solenoid Driver, MINI, MINI Male, molded, molded connector, MOV, MPD, Multifunction block timer, Multiple Control Connector, multiple voltage, NEMA 1, NEMA 13, NEMA 4, NEMA 6, NEMA4, NEMA6, NFPA tie rod linear actuators, Nitrile, Norgren, normally closed, NPN, NPT, NPT 3/4", NPT 3/8", Numatics, Off Delay, On Delay, Optical sensor valve, parallel, Parallel Control, Parker, PG11, PG9, photo eye accumulation system, pneumatic actuator, pneumatic cylinder, PNP, Power Converter, Proximity Sensor, Proximity sensors, PUR, PVC, PVC jacket, PWM, PWM Frequency, quick connect, Rectified, Reed sensor, Reed Switch, Retro-Reflective Accumulation, retro-reflective indexing, Robohand, robotic force sensor, robotics, Rotomation, round, round connectors, round cylinder, round groove, Sealcon, sense gripper force, sensors, Separate Control, Series 7000, shock resistant, Silicone, Simultaneous Solenoid Operation, sine wave dithering, single cycle timer, sinking, SJTOW, SJTOW jacket, slug, SMC, solenoid valve, solenoid valve connector, solid state electronic timing unit, solid-state, sourcing, spot welding, spot welding sensor, square wave cycle timer, Strain Relief, Strain Relief Connector, Sub-Micro, surge suppression, swaging, swaging force sensor, tactile end of stroke pneumatic hydraulic sensor, tactile sensor, tactile snsor, tie rod cylinders, tie-rod, tie-rod cylinder, time delay, timer, TMLT, universal application, universal applications, w, washdown resistant, Wire Strain Relief | posted in Cable Gland, CanTop Wire Strain Reliefs, Conveyor Controls, DIN 43650 Solenoid Valve Connectors, DIN 43650 to M12, Fieldbus Adapter Cables, M12 Round Connector, Magnetic Cylinder Proximity Sensors, magnetic cylinder sensor, proportional controller, Round Connectors, Timers, Proportional And Electronic Circuits, Wire Strain Relief Connectors
The Series 9C is a compact, universal, magnetically operated proximity switch commonly used on aluminum extruded profile type linear actuators equipped with magnetic pistons. The switches are available in both reed and electronic styles and made to fit into a 4mm key hole type slot. Position fixing is accomplished by means of a screw that is supplied in the switch body. The on board indicator light shows instant switch diagnostics to minimize downtime and facilitate installation and can be seen from wide angles. Available in the standard 9 ft. PVC wired or optional 8mm quick connect, the switch can handle AC or DC current in several configurations. The 9C is assembled in engineered polymers and designed to meet NEMA 6 / IP 67 environmental specifications.
Leave a comment | tags: Bimba, Compact Air, DE-STA-CO, electronic sensor, IP67, key hole slot, magnetic pistons, Magnetic Sensor, NEMA 6, quick connect, Reed sensor, Reed Switch, Robohand, round keyway groove, SMC, surge suppression | posted in Magnetic Cylinder Proximity Sensors