DIN 43650 / ISO 4400 / EN175301-803:2000 Molded Female Electrical Connectors for Solenoid valves that are designed using M12 and M8 round male connectors to be quickly installed in fieldbus distribution blocks. The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations. Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.
See more at: http://www.canfieldconnector.com/products/category/78/fieldbus-adapter-din-43650-solenoid-valve-connectors
Download our free app now available for any iOS or Android device!
The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile 90° interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features load suppression (not intended for UL 1449). The Series 5JR is Proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector
Download our free app on any iOS or Android device!
The Canfield Series 5JFAC all-molded DIN solenoid valve connector/gasket/cord offer a completely molded plug and play design that interfaces female ISO (DIN 43650 Form “A”), MINI and 9.4mm (Industry Standard) and 8mm Sub-Micro (DIN 43650 “C”) solenoid connections to 8mm or 12mm (round) circular connectors as shown on the following pages. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating, is far better for environmental integrity than field wire versions and makes it impossible to lose the gasket! The 5FFAC and 5JFAC are the only molded valve connectors in the industry that feature bi-directional indicator lights and load suppression (not intended for UL 1449). UL and CSA versions are available as well. The Series 5JFAC is proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3035/5jfac-molded-din-connector
And download our free Canfield Connector app on any iOS or Android device!
The CAN-SAK point of purchase display features a popular variety of individually bagged, 5J fully molded connectors which mate to your standard solenoid valves. The three tier 360° rotating 5 Ft. display rack along with the individually packaged clear hanging bag allows for easy vision to see what your buying. Easy markings on bags and boxes help identify the product to fit your needs. The product sells itself! Grab and Go!
See more at: http://www.canfieldconnector.com/products/category/80/can-sak-point-of-purchase-rack
Or download our free app on any iOS or Android device:
Canfield Connector’s Interposed Lighted Wafer (iLW) is a state of the art, electronic lighting indicator module for installation between a DIN type coil and it’s mating connector. The ultra-thin iLW’s surface mount technology and high luminescence Gallium Arsenide LED allows it to retrofit existing applications or to be used in conjunction with unlighted connectors. The iLW is MINI standard but also is available for Sub-Micro 8mm, Sub-Micro 9.4mm, DIN 43650 Form “A”/ISO 4400, and EN 175301-803:2000 retrofits. It is NEMA 4 and IP 65 dust tight and water resistant and is not polarity dependent. Designed to “sandwich” between the connector and the coil, the iLW can be installed several times without degrading the contact surfaces and operates in an ambient temperature range of -20° to +90°C.d Connector is certified to ISO 9001 with design and the Series iLW is proudly manufactured in the USA to the highest quality standards. Complete specifications can be found at www.canfieldconnector.com or by calling Bob Howard at 330-758-8299 x 122.