Tag Archives: DIN 43650 Form “C”
DIN 43650 / ISO 4400 / EN175301-803:2000 Molded Female Electrical Connectors for Solenoid valves that are designed using M12 and M8 round male connectors to be quickly installed in fieldbus distribution blocks. The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations. Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.
See more at: http://www.canfieldconnector.com/products/category/78/fieldbus-adapter-din-43650-solenoid-valve-connectors
Download our free app now available for any iOS or Android device!
Leave a comment | tags: circular connectors, connector, connectors, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", electrical connector, field wireable connector, field wireable round connector, Fieldbus Adapter, Form A, Form B, Form C, indicator lights, IP 65, ISO, LED, lighted, M12 adapter, M12 connector, M8, M8 Connector, MINI, modular connectors, molded plug, multi-port electronic interconnection systems, NEMA 4, round connector, round connectors, solenoid valve connector, Sub-Micro, surge suppression | posted in DIN 43650 To Fieldbus Adapter Solenoid Valve Connector, Fieldbus Adapter Cables
The Canfield Connector Series 5JMSD is a solenoid driver circuit (Coil Saver) tucked away in our all new in-line electronics package coupled with our 5J all-molded DIN solenoid valve connector/gasket/cord assembly for DIN 43650 Form A, Industry and Form C Solenoid Valve Connectors (EN 175301-803-2000 ). The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The Coil Saver enhances solenoid valve function as it lowers the wattage of solenoid operators of solenoid valves as it first applies a full voltage to ensure strong pull-in then drops the current when the solenoid magnetic circuit is most efficient and lowers wattage during long term energization or repeated cycles and lower RMS wattage. Both the in-line Coil Saver package and the 5J are fully encapsulated enclosures. This design allows for the Coil Saver to be isolated from the heat of the solenoid as well as installed upstream, away from the coil connector that is designed for this heat. The DC voltage version is 46mm by 15mm cylinder and is IP68 fully sealed from dust and water ingress. The in-line package can control input DC voltage and supplies PWM DC to the coil. The Series 5JMSD is Proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3060/5jmsd—in-line-micro-solenoid-driver-molded-connectors
Leave a comment | tags: coil connector, coil saver, Control Voltage, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, DIN 43650 Form "C", in-line timer, integrated gasket, IP67, ISO, Micro Solenoid Driver, molded connector, molded plug, Multiple Control Connector, multiple voltage, NEMA 6, Solenoid Driver, solenoid driver circuit, solenoid valve connector, Sub-Micro | posted in Cable Gland, DIN 43650 Solenoid Driver, DIN 43650 Solenoid Valve Connectors
The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile 90° interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features load suppression (not intended for UL 1449). The Series 5JR is Proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector
Download our free app on any iOS or Android device!
Leave a comment | tags: connector, connectors, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", full-wave bridge rectifier, IP67, ISO, LED, lighted, load suppression, Male Connector, MINI, molded connector, molded din 43650, molded plug, molded valve connectors, MOV, NEMA 6, polyurethane encapsulation, Rectified, solenoid valve connector, Sub-Micro, surge suppression | posted in DIN 43650 Solenoid Valve Connectors, Rectified DIN 43650
The Canfield Connector Interposed Lighted Wafer is an electronic, state of the art lighting module designed to install between a DIN type coil and the mating connector. Utilizing SMT (Surface Mount Technology), the iLW’s ultra-thin design and high luminescence Gallium Arsenide LEDs enable the lighted wafer to retrofit existing applications or to be used in conjunction with unlighted connectors. Designed to “sandwich” between the connector and the coil, the iLW seals from dust and moisture. The iLW can be installed several times without degradation of the contact surfaces and is not polarity dependent
Watch our YouTube video: https://www.youtube.com/watch?v=GBT__pFZca0
See more at: http://www.canfieldconnector.com/products/series/3041/ilw-electronic-lighted-din-connector-module
Leave a comment | tags: connector accessories, connectors, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", iLW, indicator light, indicator lights, IP 65, ISO, LED, lighted, Lighted gasket, lighted seal, lighted wafer, MINI, NEMA 4, SMT, Sub-Micro, Surface Mount Technology | posted in Male DIN43650
DIN 43650 / ISO 4400 / EN175301-803:2006 Female Electrical Connectors for Solenoid valves that are designed to be hand wired at the site of assembly using customer wire. The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations. Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.
See more at: http://www.canfieldconnector.com/products/category/62/field-wire-din-43650-solenoid-valve-connectors
Download our free app on any iOS or Android device!
Leave a comment | tags: 1/2" conduit, 8mm 1/2" Conduit, Canfield, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", electrical connector, field wireable connector, Form A, Form B, Form C, hand wired, indicator light, indicator lights, IP 65, ISO, lighted, MINI, NEMA 4, PG11, PG9, solenoid valve connector, Sub-Micro, surge suppression, wire feedthrough, wire fitting, Wire Strain Relief, Wire Strain Relief Connectors | posted in DIN 43650 Solenoid Valve Connectors, Wire Strain Relief Connectors
The Canfield Series 5F all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5F and 5J are the only molded valve connectors in the industry that feature a HARD USAGE cord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield offers any version of the 5F connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request. The Series 5F is Proudly Made in the U.S.A.
Watch our YouTube video to see how they work! https://www.youtube.com/watch?v=Q3b4_ZP07yQ
See more at: http://www.canfieldconnector.com/products/series/3001/5f-molded-din-connectors
And download our free app on any iOS or Android device!
Leave a comment | tags: 5F, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, DIn 43650 Form "B", DIN 43650 Form "C", Hard Usage, indicator lights, integrated gasket, IP67, ISO, lighted, MINI, molded, molded connector, molded din 43650, molded plug, molded valve connectors, NEMA 6, polyurethane encapsulation, solenoid valve connector, Sub-Micro, surge suppression | posted in Cable Gland, DIN 43650 Solenoid Valve Connectors
Canfield Connector male connectors are used as electrical quick disconnect interfaces for pneumatic and hydraulic valves and sensors. They are available in standard MINI, DIN 43650 Form “A” / ISO 4400, EN175301-803:2006, Sub-Micro 8mm, 9.4mm, and conduit arrangements. Some male connectors are available with 2+ ground or 3+ ground terminal options.
See more at: http://www.canfieldconnector.com/products/series/3042/m5-male-din-connector
Download our free app now available for any iOS or Android device!
Leave a comment | tags: conduit male thread, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", ISO, ISO Male, Male Connector, MINI, MINI Male, plate mount, quick disconnect, sheet metal mount, Sub-Micro, Sub-Micro Male | posted in Male DIN43650
The Micro Protective Connectors are available in standard MINI, DIN 43650 Form “A” / ISO 4400, EN175301-803:2006 and Sub-Micro 8mm and 9.4mm. The Canfield Connector MPCs provide electrical controllers surge suppression against voltage spikes caused by the solenoids used on hydraulic and pneumatic solenoid valves.
See more at: http://www.canfieldconnector.com/products/series/3058/p5600-din43650–surge-suppression
Leave a comment | tags: DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", Diode, field wireable connector, IP65, ISO, MINI, MOV, NEMA 4, solenoid valve connector, Sub-Micro, surge suppression | posted in DIN 43650 Solenoid Valve Connectors
The Canfield Series 5JFAC all-molded DIN solenoid valve connector/gasket/cord offer a completely molded plug and play design that interfaces female ISO (DIN 43650 Form “A”), MINI and 9.4mm (Industry Standard) and 8mm Sub-Micro (DIN 43650 “C”) solenoid connections to 8mm or 12mm (round) circular connectors as shown on the following pages. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating, is far better for environmental integrity than field wire versions and makes it impossible to lose the gasket! The 5FFAC and 5JFAC are the only molded valve connectors in the industry that feature bi-directional indicator lights and load suppression (not intended for UL 1449). UL and CSA versions are available as well. The Series 5JFAC is proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3035/5jfac-molded-din-connector
And download our free Canfield Connector app on any iOS or Android device!
Leave a comment | tags: connector, connectors, CSA, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", Fieldbus Adapter, integrated gasket, IP67, lighted, load suppression, M12, M12 connector, M8, M8 Connector, molded connector, molded din 43650, molded plug, NEMA 6, round connectors, solenoid valve connector, surge suppression, UL | posted in DIN 43650 Solenoid Valve Connectors, DIN 43650 To Fieldbus Adapter Solenoid Valve Connector, DIN 43650 to M12, Fieldbus Adapter Cables, Round Connectors
The FAC series connectors are modular interface connectors made to conform to industry standard configurations. These connectors interface female ISO, MINI and Sub-Micro solenoid connections to industry standard male 7/8″ (MINI) and 12mm (Micro) circular connectors. These are as shown on the following pages. These rugged modular connectors offer rapid installation and environmental protection designed to IP 65 and NEMA 4. Options include indication LED, surge suppression and various pre-wired circuit configurations to connect with popular multi-port electronic interconnection systems and field-bus systems.
See more at: http://www.canfieldconnector.com/products/series/3040/fac-fieldbus-adapter-din-connector
Leave a comment | tags: 3 pin connector, 4 pin connector, 5 pin connector, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", field wireable round connector, Fieldbus Adapter, IP 65, ISO, MINI, NEMA 4, solenoid valve connector, Sub-Micro | posted in DIN 43650 To Fieldbus Adapter Solenoid Valve Connector, Fieldbus Adapter Cables
Canfield Connector 
You must be logged in to post a comment.