Tag Archives: Diode

Sandwich CRT – Condensation Removal Timer

This Canfield Connector miniature timer makes any valve, with the DIN 43650 Form “A”/ISO 4400, EN175301-803:2000 electrical interface, able to operate as a compressed air system condensate removal valve. The unit installs in a modular form between an existing coil and connector. No new wiring is necessary. Retrofits on virtually any installation. It works with the valve brand of your choice. The cycle and on times are easily adjustable and two indicator lights show status.

See more at:  http://www.canfieldconnector.com/products/series/3028/sandwich-crt

Download our free app on any iOS or Android device!

sandcrt_condensation_timer_photo


P5600 Series Connector with Surge Suppression

The Micro Protective Connectors are available in standard MINI, DIN 43650 Form “A” / ISO 4400, EN175301-803:2006 and Sub-Micro 8mm and 9.4mm. The Canfield Connector MPCs provide electrical controllers surge suppression against voltage spikes caused by the solenoids used on hydraulic and pneumatic solenoid valves.

See more at:  http://www.canfieldconnector.com/products/series/3058/p5600-din43650–surge-suppression

p5600_micro_protective_connector_photo


Sandwich CRT – Condensation Removal Timer

This Canfield Connector miniature timer makes any valve, with the DIN 43650 Form “A”/ISO 4400, EN175301-803:2000 electrical interface, able to operate as a compressed air system condensate removal valve. The unit installs in a modular form between an existing coil and connector. No new wiring is necessary. Retrofits on virtually any installation. It works with the valve brand of your choice. The cycle and on times are easily adjustable and two indicator lights show status.

 

See more at:  http://www.canfieldconnector.com/products/series/3028/sandwich-crt

sandcrt_condensation_timer_photo


Rectified DIN 43650 Form A Solenoid Valve Connectors

DIN 43650 Solenoid Valve COnnectors

Molded Rectified Sealed and Boxed Solenoid valve connectors to DIN 43650 standard. All molded construction is impervious to water


Need Canfield Connector Literature?

Download the full catalog at http://www.canfieldconnector.com/DownloadCatalogs.aspx


Series 5000 Rectified DIN 43650 Solenoid Valve Connector

Canfield Connector’s R5000 Series solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connectors.  This standard permits industry interchange-ability and has been embraced by the solenoid valve industry worldwide.  The R5000 converts alternating current to direct current reducing coil burnout due to valve sticking.  Also, direct current eliminates AC “hum” inherent to alternating current.  Features include the ability for the user to wire the connector into existing installations.  Wire connections are made inside the connector housing and the wire inlet is either PG9 strain relief, 3/8″ or 1/2″ conduit.  The R5000 has a maximum current rating of 1 Amp continuous with maximum wire gauge diameter of 14 AWG.  An indicator light is offered for instant diagnostics and to aid setup and installation.

See more at:

http://www.canfieldconnector.com/products/series/3036/r5000-din43650-rectified-solenoid-valve-connector


Fieldbus Adapter DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2000 Molded Female Electrical Connectors for Solenoid valves that are designed using M12 and M8 round male connectors to be quickly installed in fieldbus distribution blocks.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at: http://www.canfieldconnector.com/products/category/78/fieldbus-adapter-din-43650-solenoid-valve-connectors