Tag Archives: Form A

Fieldbus Adapter DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2000 Molded Female Electrical Connectors for Solenoid valves that are designed using M12 and M8 round male connectors to be quickly installed in fieldbus distribution blocks.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/78/fieldbus-adapter-din-43650-solenoid-valve-connectors

Download our free app now available for any iOS or Android device!

fieldbus_connector_group_photo


Canfield Connector Field Wire DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2006 Female Electrical Connectors for Solenoid valves that are designed to be hand wired at the site of assembly using customer wire.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/62/field-wire-din-43650-solenoid-valve-connectors

Download our free app on any iOS or Android device!

fieldwire_connector_group


Canfield Connector Series 5950 – Micro Proportional Driver

A Micro Proportional Driver provides accurate control of hydraulic and pneumatic proportional solenoid valves used in mobile construction equipment and industrial processes. The MPD can control the flow of air or liquid linearly at a setting from 0.10-20 seconds. One example of use would be in a paint system. The MPD allows a solenoid to oscillate, significantly reducing system shock and wear commonly found in non-oscillation digital valve systems. The micro proportional driver is a compact electronic circuit built into an environment-resistant miniaturized enclosure. The circuit features control of proportional solenoids and operators. Functions include minimum and maximum current limiting, control signals from 0-10V or 0-20 mA (with a step function at 0.2V or 0.4 mA included for minimum current), a 0.1-20 sec. linear ramp up/ramp down adjustment and output current proportional to input command signal. This unit incorporates the DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connector male and female interface. The unit is mounted by use of a single mounting screw, DIN connector and two gaskets. Built to meet NEMA 4 environment standards, the MPD is made from engineered polymers for resistance to harsh chemicals and ingress of water or foreign substances. Adjustments are made on the top surface of the unit. The unit can control any proportional solenoid valve operation within the values specified below using variable pulse width modulation.

 

See more at:  http://www.canfieldconnector.com/products/series/3026/5950

 

5950_proportional_driver_photo


5950 – Micro Proportional Driver

A Micro Proportional Driver provides accurate control of hydraulic and pneumatic proportional solenoid valves used in mobile construction equipment
and industrial processes. The MPD can control the flow of air or liquid linearly at a setting from 0.10-20 seconds. One example of use would be in a
paint system. The MPD allows a solenoid to oscillate, significantly reducing system shock and wear commonly found in non-oscillation digital valve systems.
The micro proportional driver is a compact electronic circuit built into an environment-resistant miniaturized enclosure. the circuit features control of proportional
solenoids and operators. Functions include minimum and maximum current limiting, control signals from 0-10V or 0-20 mA (with a step function at 0.2V or 0.4 mA
included for minimum current), a 0.1-20 sec. linear ramp up/ramp down adjustment and output current proportional to input command signal. This unit incorporates
the DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connector male and female interface. The unit is mounted by use of a single mounting screw, DIN
connector and two gaskets. Built to meet NEMA 4 environment standards, the MPD is made from engineered polymers for resistance to harsh chemicals and
ingress of water or foreign substances. adjustments are made on the top surface of the unit. the unit can control any proportional solenoid valve operation within
the values specified below using variable pulse width modulation.

See more at:

http://www.canfieldconnector.com/products/series/3026/5950

5950_proportional_driver_photo


Sandwich CRT – Condensation Removal Timer

This Canfield Connector miniature timer makes any valve, with the DIN 43650 Form “A”/ISO 4400, EN175301-803:2000 electrical interface, able to operate as a compressed air system condensate removal valve. The unit installs in a modular form between an existing coil and connector. No new wiring is necessary. Retrofits on virtually any installation. It works with the valve brand of your choice. The cycle and on times are easily adjustable and two indicator lights show status

See more at: http://www.canfieldconnector.com/products/series/3028/sandwich-crt


5800 – DIN Micro Logic Timer

The Canfield Connector micro logic timer is a solid state electronic timing unit incorporated inside the standard MINI and DIN 43650 Form “A” / ISO 4400, EN 175301-
803:2000 electrical connectors. The MLT allows precise timing and logic functions in a small, easily mounted enclosure. there are eight standard timer types.
Each timer incorporates circuitry for AC or DC operation with a wide voltage range.

see more at: http://www.canfieldconnector.com/products/series/3025/5800-connector-timer-solenoid-valve-din-43650-iso


M5 – Male Quick Disconnect Interfaces

Canfield Connector male connectors are used as electrical quick disconnect interfaces for pneumatic and hydraulic valves and sensors. They are available in standard MINI, DIN 43650 Form “A” / ISO 4400, EN175301-803:2000, Sub-Micro 8mm, 9.4mm, and conduit arrangements. Some male connectors are available with 2+ ground or 3+ ground terminal options.

See more at:

http://www.canfieldconnector.com/products/series/3042/m5-male-din-connector