Tag Archives: IP67

9D – Fabco, Numatics, Rotomation Grooves

The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3014/9d-reed-electronic-cylinder-proximity-sensor

 

9d_sensor_photo


5JMSD – In-line Micro Solenoid Driver Molded Connectors

The Canfield Connector Series 5JMSD is a solenoid driver circuit (Coil Saver) tucked away in our all new in-line electronics package coupled with our 5J all-molded DIN solenoid valve connector/gasket/cord assembly for DIN 43650 Form A, Industry and Form C Solenoid Valve Connectors (EN 175301-803-2000 ). The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The Coil Saver enhances solenoid valve function as it lowers the wattage of solenoid operators of solenoid valves as it first applies a full voltage to ensure strong pull-in then drops the current when the solenoid magnetic circuit is most efficient and lowers wattage during long term energization or repeated cycles and lower RMS wattage. Both the in-line Coil Saver package and the 5J are fully encapsulated enclosures. This design allows for the Coil Saver to be isolated from the heat of the solenoid as well as installed upstream, away from the coil connector that is designed for this heat.  The DC voltage version is 46mm by 15mm cylinder and is IP68 fully sealed from dust and water ingress.  The in-line package can control input DC voltage and supplies PWM DC to the coil. The Series 5JMSD is Proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3060/5jmsd—in-line-micro-solenoid-driver-molded-connectors

 

5jmsd_solenoid_driver_molded_connector_photor00


Series 5JR – Rectified, Lighted, Suppressed

The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector.  The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking.  Also, direct current eliminates AC “hum” inherent to alternating current.  Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility.  The low profile 90° interface/cord configuration allows for installation in many limited space applications.  The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket!  Features load suppression (not intended for UL 1449).  The Series 5JR is Proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector

Download our free app on any iOS or Android device!

5jr_molded_connector_photo


Series 8F Magnetic Reed Type Proximity Sensor

The Canfield Connector Series 8F is a compact yet rugged magnetic reed type proximity sensor designed for rigorous applications where critical magnetic sensing is needed. The tough nylon shell is over-molded with polyurethane to create an environmentally resilient seal from the elements and is rated to IP67. The compact size and cylindrical shape are ideal for mounting in a simple hole or cylindrical shape. There is a tab mounting version also available. The 8F can be mounted solidly and fit into many common magnetic sensing applications. Offered standard with 9ft. cord or an M8 quick connect connector, the switch is also available in either normally open or normally closed switch types.

See more at:  http://www.canfieldconnector.com/products/series/3010/8f-reed-cylinder-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

8f_sensor_photo


Series 8E Low Current Magnetic Sensor

The Canfield Connector Series 8E is a linear actuator magnetic sensor designed for harsh industrial applications. With mounting styles for tie rod or round type linear actuators, the 8E features an all encapsulated body that is covered by a metal housing for strength. The switch is available in reed or electronic versions and electrical connection is made by use of 9 ft. PVC or 8mm quick connect male pigtail. The 8E is water resistant and dust tight to IP67.

See more at:  http://www.canfieldconnector.com/products/series/3009/8e-reed-electronic-magnetic-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

8e_sensor_photo


Series 9Q Magnetic Proximity Switch

The Canfield Connector Series 9Q is a magnetic proximity switch that is engineered to fit into extruded actuators that are made with a “T” slot. The unique design of the 9Q enables it to be installed anywhere along the slot and assembled in place without taking off the actuator end-cap. The rugged polyurethane encapsulated switch features an innovative design that incorporates a hard nylon shell. The switches are available in reed or electronic sensing and feature surge suppression and on board indicator light standard. Offered as a flying lead or 8mm quick connect, the sensors are quickly and easily wired in to any application. The sensors meet NEMA 6 / IP67 environmental specifications and are corrosion and wash-down compatible. This sensor is proudly made in the USA.

See more at: http://www.canfieldconnector.com/products/series/3022/9q-reed-electronic-cylinder-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

9q_sensor_photo


Solenoid Valve Connector Series 5F

The Canfield Series 5F all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5F and 5J are the only molded valve connectors in the industry that feature a HARD USAGE cord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield offers any version of the 5F connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request. The Series 5F is Proudly Made in the U.S.A.

Watch our YouTube video to see how they work! https://www.youtube.com/watch?v=Q3b4_ZP07yQ

See more at:  http://www.canfieldconnector.com/products/series/3001/5f-molded-din-connectors

And download our free app on any iOS or Android device!

5f_molded_connector_photo