Tag Archives: LED

9D – Fabco, Numatics, Rotomation Grooves

The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3014/9d-reed-electronic-cylinder-proximity-sensor

 

9d_sensor_photo


Fieldbus Adapter DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2000 Molded Female Electrical Connectors for Solenoid valves that are designed using M12 and M8 round male connectors to be quickly installed in fieldbus distribution blocks.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/78/fieldbus-adapter-din-43650-solenoid-valve-connectors

Download our free app now available for any iOS or Android device!

fieldbus_connector_group_photo


Series 5JR – Rectified, Lighted, Suppressed

The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector.  The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking.  Also, direct current eliminates AC “hum” inherent to alternating current.  Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility.  The low profile 90° interface/cord configuration allows for installation in many limited space applications.  The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket!  Features load suppression (not intended for UL 1449).  The Series 5JR is Proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector

Download our free app on any iOS or Android device!

5jr_molded_connector_photo


Series ILW-Interposed Lighted Wafer Indicator Light

The Canfield Connector Interposed Lighted Wafer is an electronic, state of the art lighting module designed to install between a DIN type coil and the mating connector. Utilizing SMT (Surface Mount Technology), the iLW’s ultra-thin design and high luminescence Gallium Arsenide LEDs enable the lighted wafer to retrofit existing applications or to be used in conjunction with unlighted connectors. Designed to “sandwich” between the connector and the coil, the iLW seals from dust and moisture. The iLW can be installed several times without degradation of the contact surfaces and is not polarity dependent

Watch our YouTube video:  https://www.youtube.com/watch?v=GBT__pFZca0

See more at:  http://www.canfieldconnector.com/products/series/3041/ilw-electronic-lighted-din-connector-module

ilw_lighted_wafer_connector_photo


Canfield Connector Optical Sensor Valve

Canfield Connector Optical Sensor Valves are an all in one piece solution to zero pressure photo-eye conveyor control.  Featuring an all solid state sensor using infrared polarized light that cannot be falsed coupled with low cost daisy chain style quick connect wiring  and a long life three way solenoid valve for puck control.  The product is offered in Retro-Reflective or diffused Accumulation.

See more at:  http://www.canfieldconnector.com/products/category/51/conveyor-controls

Download our free app on any iOS or Android device!

conveyor_controls_photo1


CAN-SAK Point of Purchase Rack

The CAN-SAK point of purchase display features a popular variety of individually bagged, 5J fully molded connectors which mate to your standard solenoid valves. The three tier 360° rotating 5 Ft. display rack along with the individually packaged clear hanging bag allows for easy vision to see what your buying.  Easy markings on bags and boxes help identify the product to fit your needs.  The product sells itself!  Grab and Go!

See more at:  http://www.canfieldconnector.com/products/category/80/can-sak-point-of-purchase-rack

Or download our free app on any iOS or Android device:

https://itunes.apple.com/us/app/canfield-connector-mobile/id1167616267?ls=1&mt=8

https://play.google.com/store/apps/details?id=com.canfieldindustries.canfieldconnector&hl=en

rack_assy_photo_d02


Series 8WS Reed & Electronic Sensor for 12 mm Dovetail Applications

The Canfield Connector Series 8WS reed and electronic magnet sensors are rugged yet compact switches used to sense position on pneumatic actuators equipped with a magnetic piston and 12mm dovetail groove. The switch can be slipped in and tightened from anywhere along the groove that is fabricated into the cylinder wall or clamping system. The switch features a die cast holder which clamps to the cylinder groove while the electronics are fully encapsulated and resistance to environment. These sensors offer a wide voltage range from 0-120 V AC/DC 50/60Hz and have a up to a 500 mA switching current rating. The switch has a high intensity indicator light which indicates power to the switch and load. The switch comes standard with 9 ft. PVC or 8mm quick connect male pigtail.

See more at:  http://www.canfieldconnector.com/products/series/3011/8ws-reed-electronic-cylinder-proximity-magnetic-cylinder-sensor

8ws_sensor_photo