Tag Archives: lighted

Fieldbus Adapter DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2000 Molded Female Electrical Connectors for Solenoid valves that are designed using M12 and M8 round male connectors to be quickly installed in fieldbus distribution blocks.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/78/fieldbus-adapter-din-43650-solenoid-valve-connectors

Download our free app now available for any iOS or Android device!

fieldbus_connector_group_photo


Series 5JR – Rectified, Lighted, Suppressed

The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector.  The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking.  Also, direct current eliminates AC “hum” inherent to alternating current.  Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility.  The low profile 90° interface/cord configuration allows for installation in many limited space applications.  The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket!  Features load suppression (not intended for UL 1449).  The Series 5JR is Proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector

Download our free app on any iOS or Android device!

5jr_molded_connector_photo


Series ILW-Interposed Lighted Wafer Indicator Light

The Canfield Connector Interposed Lighted Wafer is an electronic, state of the art lighting module designed to install between a DIN type coil and the mating connector. Utilizing SMT (Surface Mount Technology), the iLW’s ultra-thin design and high luminescence Gallium Arsenide LEDs enable the lighted wafer to retrofit existing applications or to be used in conjunction with unlighted connectors. Designed to “sandwich” between the connector and the coil, the iLW seals from dust and moisture. The iLW can be installed several times without degradation of the contact surfaces and is not polarity dependent

Watch our YouTube video:  https://www.youtube.com/watch?v=GBT__pFZca0

See more at:  http://www.canfieldconnector.com/products/series/3041/ilw-electronic-lighted-din-connector-module

ilw_lighted_wafer_connector_photo


Canfield Connector Field Wire DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2006 Female Electrical Connectors for Solenoid valves that are designed to be hand wired at the site of assembly using customer wire.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/62/field-wire-din-43650-solenoid-valve-connectors

Download our free app on any iOS or Android device!

fieldwire_connector_group


Series 9Q Magnetic Proximity Switch

The Canfield Connector Series 9Q is a magnetic proximity switch that is engineered to fit into extruded actuators that are made with a “T” slot. The unique design of the 9Q enables it to be installed anywhere along the slot and assembled in place without taking off the actuator end-cap. The rugged polyurethane encapsulated switch features an innovative design that incorporates a hard nylon shell. The switches are available in reed or electronic sensing and feature surge suppression and on board indicator light standard. Offered as a flying lead or 8mm quick connect, the sensors are quickly and easily wired in to any application. The sensors meet NEMA 6 / IP67 environmental specifications and are corrosion and wash-down compatible. This sensor is proudly made in the USA.

See more at: http://www.canfieldconnector.com/products/series/3022/9q-reed-electronic-cylinder-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

9q_sensor_photo


Solenoid Valve Connector Series 5F

The Canfield Series 5F all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5F and 5J are the only molded valve connectors in the industry that feature a HARD USAGE cord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield offers any version of the 5F connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request. The Series 5F is Proudly Made in the U.S.A.

Watch our YouTube video to see how they work! https://www.youtube.com/watch?v=Q3b4_ZP07yQ

See more at:  http://www.canfieldconnector.com/products/series/3001/5f-molded-din-connectors

And download our free app on any iOS or Android device!

5f_molded_connector_photo


5JFAC – Fieldbus, Lighted, Suppressed

The Canfield Series 5JFAC all-molded DIN solenoid valve connector/gasket/cord offer a completely molded plug and play design that interfaces female ISO (DIN 43650 Form “A”), MINI and 9.4mm (Industry Standard) and 8mm Sub-Micro (DIN 43650 “C”) solenoid connections to 8mm or 12mm (round) circular connectors as shown on the following pages. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating, is far better for environmental integrity than field wire versions and makes it impossible to lose the gasket! The 5FFAC and 5JFAC are the only molded valve connectors in the industry that feature bi-directional indicator lights and load suppression (not intended for UL 1449). UL and CSA versions are available as well. The Series 5JFAC is proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3035/5jfac-molded-din-connector

And download our free Canfield Connector app on any iOS or Android device!

5jfac_fieldbus_molded_connector_photo