Tag Archives: PG11

Canfield Connector Field Wire DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2006 Female Electrical Connectors for Solenoid valves that are designed to be hand wired at the site of assembly using customer wire.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/62/field-wire-din-43650-solenoid-valve-connectors

Download our free app on any iOS or Android device!

fieldwire_connector_group


Canfield Connector Nickel Strain Relief Cord Grips

Canfield Connector’s Nickel Plated Brass Strain Relief CanTop Connectors are a series of wire bulkhead feed through connectors which have integrated wire strain relief and sealing mechanism.  These CanTops are made from rugged engineered materials which are impervious to dust and moisture.  Available in various NPT, PG thread sizes.  These CanTops are compatible with wire diameters from .079” to 1.732” to ensure a tight fit while enhancing any wire installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3046/cantop-nickel-brass-strain-relief-connector-cord-grips

cantop_metal_strainrelief_photo


Need Canfield Connector Literature?

Download the full catalog at http://www.canfieldconnector.com/DownloadCatalogs.aspx


Series P5600 DIN 43650 Micro Protective Connectors

The Micro Protective Connectors are available in standard MINI, DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 and Sub-Micro 8mm and 9.4mm. The Canfield Connector MPCs provide electrical controllers surge suppression against voltage spikes caused by the solenoids used on hydraulic and pneumatic solenoid valves.


Series 5000 ISO and 8mm Sub-Micro connectors

Our Series 5000 ISO and 8mm Sub-Micro connectors are made according to DIN 43650 / ISO 4400, EN175301-803:2000 forms. The MINI and 9.4mm Sub-Micro connectors are industry standards and are used where rapid installation and service are a must. Both the MINI and 9.4mm Sub-Micro connectors are compatible with DIN 43650 form. All are used as protective enclosures for electrical connection in conjunction with hydraulic and pneumatic solenoid valves. Series 5000 connectors offer distinct advantages over “hardwired” solenoid valves because of their modular design.  Better than molded construction when special wire is needed or when using one long wire run.