Tag Archives: PG9

Canfield Connector Field Wire DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2006 Female Electrical Connectors for Solenoid valves that are designed to be hand wired at the site of assembly using customer wire.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/62/field-wire-din-43650-solenoid-valve-connectors

Download our free app on any iOS or Android device!

fieldwire_connector_group


MCCR – Multiple Control Distribution

The Canfield Connector MCCR is a cable distribution connector which uses pass-through technology to allow control of multiple parallel or independent devices. Devised with double solenoids and solenoid valve manifolds in mind, the MCCR allows for simplified wiring and easy replacement of components in an automated, modular environment. The gasket-thin head fits between a single female connector and the associated male device with the DIN 43650 Form “A”, EN175301-803:2006 interface. Exiting from the MCCR head is a three conductor cable with ISO HT PG9 strain relief connector attached. Two available circuits allow for separate (independent) or parallel (simultaneous) control of the downstream device. The environment resistant quick connect style allows for plug and play designs in the factory that require modern hydraulic or pneumatic systems.

See more at:  http://www.canfieldconnector.com/products/series/3043/mccr-multiple-distribution-din-connector

And download our free Canfield Connector app any iOS or Anroid device.

OLYMPUS DIGITAL CAMERA


Canfield Connector Nickel Strain Relief Cord Grips

Canfield Connector’s Nickel Plated Brass Strain Relief CanTop Connectors are a series of wire bulkhead feed through connectors which have integrated wire strain relief and sealing mechanism.  These CanTops are made from rugged engineered materials which are impervious to dust and moisture.  Available in various NPT, PG thread sizes.  These CanTops are compatible with wire diameters from .079” to 1.732” to ensure a tight fit while enhancing any wire installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3046/cantop-nickel-brass-strain-relief-connector-cord-grips

cantop_metal_strainrelief_photo


Need Canfield Connector Literature?

Download the full catalog at http://www.canfieldconnector.com/DownloadCatalogs.aspx


Series 5000 Rectified DIN 43650 Solenoid Valve Connector

Canfield Connector’s R5000 Series solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connectors.  This standard permits industry interchange-ability and has been embraced by the solenoid valve industry worldwide.  The R5000 converts alternating current to direct current reducing coil burnout due to valve sticking.  Also, direct current eliminates AC “hum” inherent to alternating current.  Features include the ability for the user to wire the connector into existing installations.  Wire connections are made inside the connector housing and the wire inlet is either PG9 strain relief, 3/8″ or 1/2″ conduit.  The R5000 has a maximum current rating of 1 Amp continuous with maximum wire gauge diameter of 14 AWG.  An indicator light is offered for instant diagnostics and to aid setup and installation.

See more at:

http://www.canfieldconnector.com/products/series/3036/r5000-din43650-rectified-solenoid-valve-connector


Fieldbus Adapter DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2000 Molded Female Electrical Connectors for Solenoid valves that are designed using M12 and M8 round male connectors to be quickly installed in fieldbus distribution blocks.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at: http://www.canfieldconnector.com/products/category/78/fieldbus-adapter-din-43650-solenoid-valve-connectors


NEW! Sales tool for our ILW lighted gasket

The CanCon ILW being shown on our new sales tool the PST-ILW-001.