Tag Archives: pneumatic cylinder

Series 7C Hugh Current Proximity Sensor

The Canfield Series 7C proximity sensors are used to sense position on pneumatic actuators equipped with magnetic pistons from 2″ to 8″ bore. This proven design is rugged yet cost effective. All switches feature a self-adjusting clamp that grips standard NFPA and custom cylinders eliminating stocking requirements of many clamps for different bore sizes. The Series 7C boasts the largest number of custom circuits to match applications found in the market. Examples include; 1 or 4 Amp reed switches, normally open, normally closed or SPDT switch types, reed or electronic sensing elements in the same package style, not to mention the industry’s first 120 VAC Hall sensor. The low cost 7C features a ½” conduit hub and wire lead to meet stringent electrical codes in certain regions and applications.

See more at:  http://www.canfieldconnector.com/products/series/3004/7c-reed-electronic-cylinder-proximity-sensor

Download our free app on any iOS or Android device!

7c_sensor_photo


Series 8WS Reed & Electronic Sensor for 12 mm Dovetail Applications

The Canfield Connector Series 8WS reed and electronic magnet sensors are rugged yet compact switches used to sense position on pneumatic actuators equipped with a magnetic piston and 12mm dovetail groove. The switch can be slipped in and tightened from anywhere along the groove that is fabricated into the cylinder wall or clamping system. The switch features a die cast holder which clamps to the cylinder groove while the electronics are fully encapsulated and resistance to environment. These sensors offer a wide voltage range from 0-120 V AC/DC 50/60Hz and have a up to a 500 mA switching current rating. The switch has a high intensity indicator light which indicates power to the switch and load. The switch comes standard with 9 ft. PVC or 8mm quick connect male pigtail.

See more at:  http://www.canfieldconnector.com/products/series/3011/8ws-reed-electronic-cylinder-proximity-magnetic-cylinder-sensor

8ws_sensor_photo


Need Canfield Connector Literature?

Download the full catalog at http://www.canfieldconnector.com/DownloadCatalogs.aspx


Get Your iTunes and Google Apps for Canfield Connector available now!

Cover Art

Canfield Connector on Itunes

Canfield Industries

Business

Canfield Connector Logo

Canfield Connector for Android on Google Play

Canfield Industries


Series 8D Reed & Electronic Magnetic Sensors

 

The Canfield Connector Series 8D is a robust yet compact switch designed to sense position of pneumatic cylinders with magnetic pistons. The switch features an all encapsulated design with a metal over housing that protects the internal components from harsh environments. The switch comes in reed, or electronic versions and has either 9 ft. PVC or 8mm quick connect male pigtail A broad range of clamping styles make this a very versatile alternative for sensing round or tie rod type linear actuator. The switch comes standard with an indicator light that shows switching condition.


Series 8000 Proximity Sensors

The Canfield Connector Series 8000 Reed and Electronic sensors are compact units designed for sensing applications on round cylinders from 9/16″ – 4″ and tie-rod pneumatic cylinders from 3/4″ – 8″ bore. These sensors offer a wide voltage range from 0-120 VAC/VDC 50/60 Hz and high current capacity up to 0.5 Amps. They include high intensity indicator lights and a wide viewing angle. The sensor’s small package can fit easily on the smallest cylinder without appearing too large. The Series 8000’s design promotes ease of installation with a tight fit. Options include 9ft. PVC or 8mm quick connect male pigtail.


Series 8WS Reed & Electronic Magnet Sensors

The Canfield Connector Series 8WS reed and electronic magnet sensors are rugged yet compact switches used to sense position on pneumatic actuators equipped with a magnetic piston and 12mm dovetail groove. The switch can be slipped in and tightened from anywhere along the groove that is fabricated into the cylinder wall or clamping system. The switch features a die cast holder which clamps to the cylinder groove while the electronics are fully encapsulated and resistance to environment. These sensors offer a wide voltage range from 0-120 V AC/DC 50/60Hz and have a up to a 500 mA switching current rating. The switch has a high intensity indicator light which indicates power to the switch and load. The switch comes standard with 9 ft. PVC or 8mm quick connect male pigtail.