Tag Archives: PVC jacket

Series CS Cylindrical Threaded Mount Sensor

The Canfield Connector Series CS Cylindrical Threaded Mount Sensor is a rugged and compact magnetic sensor set within a miniature encapsulated Stainless Steel M8 threaded housing.  Available in reed or electronic sensing, the CS sensor can sense magnets or magnetic objects in industrial machinery and mobile equipment.  Typically used where greater sensing distance is required, the CS sensor changes state in the presence of a magnetic field.  Electrical output for the CS is normally open, with sinking or sourcing outputs for the electronic versions.  Input voltages available are 0 to 120 VAC/DC .5 Amp maximum for the reed and 5-24 VDC 0.2 Amp maximum for the electronic versions.  The sensor is made of a Stainless Steel  body, TPU encapsulant and has PVC wire standard and is NEMA 6.  Temperature ranges are -20° to 80°C.  The CS Series is proudly made in the U.S.A.

 

See more at:  http://www.canfieldconnector.com/products/category/82/all-threaded-magnetic-sensors

 

Download our free app on any iOS or Android device!

 

All_Threaded_Magnetic_Sensor_R00


Need Canfield Connector Literature?

Download the full catalog at http://www.canfieldconnector.com/DownloadCatalogs.aspx


Series 5FR all molded DIN solenoid valve connectors

The Canfield Series 5FR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5FR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight-line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features bi-directional indicator lights, and load suppression (not intended for UL 1449). The Series 5FR is Proudly Made in the U.S.A


Series 5J all-molded DIN solenoid valve connector

The Canfield Series 5J all-molded DIN solenoid valve connector/gasket/cord assembly offers a completely molded design that is far better for environmental integrity than field wire versions. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “90°” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. The 5J and 5F are the only molded valve connectors in the industry that feature a HARD USAGE cord as a standard option in any length required, bi-directional indicator lights, and load suppression (not intended for UL 1449). UL and CSA versions are available as well. Canfield offers any version of the 5J connector with special wires including high flex, media compatible wire, special use wire, high temperature wire on request.  The Series 5J is Proudly Made in the U.S.A.