Tag Archives: quick connect

9D – Fabco, Numatics, Rotomation Grooves

The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3014/9d-reed-electronic-cylinder-proximity-sensor

 

9d_sensor_photo


Series 8F Magnetic Reed Type Proximity Sensor

The Canfield Connector Series 8F is a compact yet rugged magnetic reed type proximity sensor designed for rigorous applications where critical magnetic sensing is needed. The tough nylon shell is over-molded with polyurethane to create an environmentally resilient seal from the elements and is rated to IP67. The compact size and cylindrical shape are ideal for mounting in a simple hole or cylindrical shape. There is a tab mounting version also available. The 8F can be mounted solidly and fit into many common magnetic sensing applications. Offered standard with 9ft. cord or an M8 quick connect connector, the switch is also available in either normally open or normally closed switch types.

See more at:  http://www.canfieldconnector.com/products/series/3010/8f-reed-cylinder-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

8f_sensor_photo


MCCR – Multiple Control Distribution

The Canfield Connector MCCR is a cable distribution connector which uses pass-through technology to allow control of multiple parallel or independent devices. Devised with double solenoids and solenoid valve manifolds in mind, the MCCR allows for simplified wiring and easy replacement of components in an automated, modular environment. The gasket-thin head fits between a single female connector and the associated male device with the DIN 43650 Form “A”, EN175301-803:2006 interface. Exiting from the MCCR head is a three conductor cable with ISO HT PG9 strain relief connector attached. Two available circuits allow for separate (independent) or parallel (simultaneous) control of the downstream device. The environment resistant quick connect style allows for plug and play designs in the factory that require modern hydraulic or pneumatic systems.

See more at:  http://www.canfieldconnector.com/products/series/3043/mccr-multiple-distribution-din-connector

And download our free Canfield Connector app any iOS or Anroid device.

OLYMPUS DIGITAL CAMERA


Series 8WS Reed & Electronic Sensor for 12 mm Dovetail Applications

The Canfield Connector Series 8WS reed and electronic magnet sensors are rugged yet compact switches used to sense position on pneumatic actuators equipped with a magnetic piston and 12mm dovetail groove. The switch can be slipped in and tightened from anywhere along the groove that is fabricated into the cylinder wall or clamping system. The switch features a die cast holder which clamps to the cylinder groove while the electronics are fully encapsulated and resistance to environment. These sensors offer a wide voltage range from 0-120 V AC/DC 50/60Hz and have a up to a 500 mA switching current rating. The switch has a high intensity indicator light which indicates power to the switch and load. The switch comes standard with 9 ft. PVC or 8mm quick connect male pigtail.

See more at:  http://www.canfieldconnector.com/products/series/3011/8ws-reed-electronic-cylinder-proximity-magnetic-cylinder-sensor

8ws_sensor_photo


5JMSD- In-line Micro Solenoid Driver Molded Connectors

The Canfield Connector Series 5JMSD is a solenoid driver circuit (Coil Saver) tucked away in our all new in-line electronics package coupled with our 5J all-molded DIN solenoid valve connector/gasket/cord assembly for DIN 43650 Form A, Industry and Form C Solenoid Valve Connectors (EN 175301-803-2000 ). The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The Coil Saver enhances solenoid valve function as it lowers the wattage of solenoid operators of solenoid valves as it first applies a full voltage to ensure strong pull-in then drops the current when the solenoid magnetic circuit is most efficient and lowers wattage during long term energization or repeated cycles and lower RMS wattage. Both the in-line Coil Saver package and the 5J are fully encapsulated enclosures. This design allows for the Coil Saver to be isolated from the heat of the solenoid as well as installed upstream, away from the coil connector that is designed for this heat.  The DC voltage version is 46mm by 15mm cylinder and is IP68 fully sealed from dust and water ingress.  The in-line package can control input DC voltage and supplies PWM DC to the coil. The Series 5JMSD is Proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3060/5jmsd—in-line-micro-solenoid-driver-molded-connectors

 

5jmsd_solenoid_driver_molded_connector_photor00


12mm Female Molded Locking Round Connector

M12, 12mm Female Molded Locking Euro-style solenoid and sensor round connectors feature metric locking, and are used for factory automation, commercial electronics, process control, and industrial instrumentation. Available in 3 pin, 250V AC/DC, 4 Amps max.

See more at:  http://www.canfieldconnector.com/products/series/3051/12mm-female-molded-locking

12mm_f_molded_locking_photo


Nylon Strain Relief Cord Grip CanTops

Canfield Connector’s Nylon Strain Relief CanTop  Connectors are a series of wire bulkhead feed through connectors which have integrated wire strain relief and sealing mechanism.  These CanTops are made from rugged engineered materials which are impervious to dust and moisture.  Available in various NPT, PG, and metric thread sizes and in Gray or Black Nylon.  These CanTops are compatible with wire diameters from .079” to 1.732”, to ensure a tight fit while enhancing any wire installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3045/cantop-strain-relief-connector-cord-grips

cantop_nylon_strainrelief_photo