Tag Archives: solid state sensor

9D – Fabco, Numatics, Rotomation Grooves

The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3014/9d-reed-electronic-cylinder-proximity-sensor

 

9d_sensor_photo


Canfield Connector Optical Sensor Valve

Canfield Connector Optical Sensor Valves are an all in one piece solution to zero pressure photo-eye conveyor control.  Featuring an all solid state sensor using infrared polarized light that cannot be falsed coupled with low cost daisy chain style quick connect wiring  and a long life three way solenoid valve for puck control.  The product is offered in Retro-Reflective or diffused Accumulation.

See more at:  http://www.canfieldconnector.com/products/category/51/conveyor-controls

Download our free app on any iOS or Android device!

conveyor_controls_photo1


Canfield Connector 9D Series Sensor for Fabco, Numatics, Rotomation Grooves

The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.

 

9d_sensor_photo


8WF – Weld Field Immune

The Canfield Connector Series 8WF weld field immune electronic sensors are compact magnetic sensors designed for sensing position magnetic pistons on pneumatic actuators while ignoring electro-magnetic pulses generated from AC weld fields. Designed for round type cylinders with diameters from 9/16″ – 4″ and tie-rod type cylinders from 3/4″
– 8″ bore, the 8WF features a rugged stainless steel and nylon enclosure and high current capacity up to 0.2 Amps and 24VDC input. Included in the sensor is a high intensity indicator light that can be seen from a wide viewing angle. The sensor’s small package can fit easily on the smallest cylinder without appearing too large. The Series 8WF design
promotes ease of installation with a tight fit. Options include 9ft. PVC or 8mm quick connect male pigtail.

See more at:

http://www.canfieldconnector.com/products/series/3012/8wf-weld-field-immune-cylinder-electronic-proximity-sensor

8wf_sensor_photo