Tag Archives: DIN 43650
The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile 90° interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features load suppression (not intended for UL 1449). The Series 5JR is Proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector
Download our free app on any iOS or Android device!
Leave a comment | tags: connector, connectors, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", full-wave bridge rectifier, IP67, ISO, LED, lighted, load suppression, Male Connector, MINI, molded connector, molded din 43650, molded plug, molded valve connectors, MOV, NEMA 6, polyurethane encapsulation, Rectified, solenoid valve connector, Sub-Micro, surge suppression | posted in DIN 43650 Solenoid Valve Connectors, Rectified DIN 43650
DIN 43650 / ISO 4400 / EN175301-803:2006 Female Electrical Connectors for Solenoid valves that are designed to be hand wired at the site of assembly using customer wire. The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations. Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.
See more at: http://www.canfieldconnector.com/products/category/62/field-wire-din-43650-solenoid-valve-connectors
Download our free app on any iOS or Android device!
Leave a comment | tags: 1/2" conduit, 8mm 1/2" Conduit, Canfield, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", electrical connector, field wireable connector, Form A, Form B, Form C, hand wired, indicator light, indicator lights, IP 65, ISO, lighted, MINI, NEMA 4, PG11, PG9, solenoid valve connector, Sub-Micro, surge suppression, wire feedthrough, wire fitting, Wire Strain Relief, Wire Strain Relief Connectors | posted in DIN 43650 Solenoid Valve Connectors, Wire Strain Relief Connectors
This Canfield Connector miniature timer makes any valve, with the DIN 43650 Form “A”/ISO 4400, EN175301-803:2000 electrical interface, able to operate as a compressed air system condensate removal valve. The unit installs in a modular form between an existing coil and connector. No new wiring is necessary. Retrofits on virtually any installation. It works with the valve brand of your choice. The cycle and on times are easily adjustable and two indicator lights show status.
See more at: http://www.canfieldconnector.com/products/series/3028/sandwich-crt
Leave a comment | tags: air compressor condensation, condensation removal, Condensation Removal Timer, cycle time, cycle timer, DIN 43650, DIN 43650 Form "A", Diode, ISO, Manual override, MOV, Off Delay, On Delay, on time, solid state electronic timing unit, solid state timer, solid-state, universal timers | posted in timer, Timers, Proportional And Electronic Circuits
The Canfield Connector micro logic timer is a solid state electronic timing unit incorporated inside the standard MINI and DIN 43650 Form “A” / ISO 4400, EN 175301-
803:2000 electrical connectors. The MLT allows precise timing and logic functions in a small, easily mounted enclosure. there are eight standard timer types.
Each timer incorporates circuitry for AC or DC operation with a wide voltage range.
See more at: http://www.canfieldconnector.com/products/series/3025/5800-connector-timer-solenoid-valve-din-43650-iso
Leave a comment | tags: cycle time, cycle timer, delay on break, Delay On Make, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", encapsulated timing module, internal timer circuit, Interval Delay, IP 65, IP65, ISO, ISO 4400, logic trigger, Micro Logic Timer, MINI, NEMA 4, Off Delay, On Delay, single cycle timer, solid state electronic timing unit, solid-state, square wave, square wave cycle timer, time delay, Time Delay Relay, timer, timer connector, timers and controls | posted in Time Delay Relay, timer, Timers, Proportional And Electronic Circuits
The Canfield Connector DCP coil pin protectors are low cost replacements for solenoid connectors that ensure protection of solenoid terminals during shipping and handling. They can also be used to protect spade style terminals on a variety of other products. DCPs are available in a host of colors and styles as well as special logo markings to match the application. Constructed of low cost yet rugged polymers, the DCP adds aesthetic appeal and advertising value to the solenoid valve. There is a DCP available for ISO, industry standard MINI, Sub-Micro, and dual spade hydraulic coils.
See more at: http://www.canfieldconnector.com/products/series/3044/dcp-din43650-connector-coil-protector
Leave a comment | tags: coil pin protector, coil protectors, connector protectors, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", ISO 4400, spade protectors | posted in DIN 43650 Solenoid Valve Connectors
Leave a comment | tags: connectors, DIN 43650, DIN 43650 Form "A", DIN43650, EN175301-803:2000, IP65, IP67, ISO, ISO 4400, MINI, molded, NEMA 4, NEMA 6, Numatics, Sub-Micro, surge suppression, washdown resistant | posted in DIN 43650 Solenoid Valve Connectors, DIN 43650 To Fieldbus Adapter Solenoid Valve Connector, DIN 43650 to M12, Fieldbus Adapter Cables, Wire Strain Relief Connectors
Molded Rectified Sealed and Boxed Solenoid valve connectors to DIN 43650 standard. All molded construction is impervious to water
Leave a comment | tags: ASCO, Baccara Valve, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", Diode, Goyen Valve, IP67, KIP Valve, molded, Nass Magnet, NEMA 6, Numatics, Parker Pneumatic, Sub-Micro, surge suppression, Versa Valve, washdown resistant | posted in DIN 43650 Solenoid Valve Connectors, Rectified DIN 43650
The Canfield Connector Series 5JMSD is a solenoid driver circuit (Coil Saver) tucked away in our all new in-line electronics package coupled with our 5J all-molded DIN solenoid valve connector/gasket/cord assembly for DIN 43650 Form A, Industry and Form C Solenoid Valve Connectors (EN 175301-803-2000 ). The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The Coil Saver enhances solenoid valve function as it lowers the wattage of solenoid operators of solenoid valves as it first applies a full voltage to ensure strong pull-in then drops the current when the solenoid magnetic circuit is most efficient and lowers wattage during long term energization or repeated cycles and lower RMS wattage. Both the in-line Coil Saver package and the 5J are fully encapsulated enclosures. This design allows for the Coil Saver to be isolated from the heat of the solenoid as well as installed upstream, away from the coil connector that is designed for this heat. The DC voltage version is 46mm by 15mm cylinder and is IP68 fully sealed from dust and water ingress. The in-line package can control input DC voltage and supplies PWM DC to the coil. The Series 5JMSD is Proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3060/5jmsd—in-line-micro-solenoid-driver-molded-connectors
Leave a comment | tags: DIN 4360 Form "C", DIN 43650, DIN 43650 Form "A", DIN43650, IP67, ISO 4400, LED, Numatics, quick connect | posted in DIN 43650 Solenoid Valve Connectors
The Canfield Connector Interposed Lighted Wafer is an electronic, state of the art lighting module designed to install between a DIN (DIN 43650) type coil and the mating connector. Utilizing SMT (Surface Mount Technology), the iLW’s ultra-thin design and high luminescence Gallium Arsenide LEDs enable the lighted wafer to retrofit existing applications or to be used in conjunction with unlighted connectors. Designed to “sandwich” between the connector and the coil, the iLW seals from dust and moisture. The iLW can be installed several times without degradation of the contact surfaces and is not polarity dependent.
See more at: http://www.canfieldconnector.com/products/series/3041/ilw-electronic-lighted-din-connector-module
Leave a comment | tags: DIN 4360 Form "C", DIN 43650, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, indicator light, IP67, lighted seal, solenoid valve | posted in DIN 43650 Solenoid Valve Connectors
The Canfield Series 5FFAC all-molded DIN solenoid valve connector/gasket/cord offer a completely molded plug and play design that interfaces female ISO (DIN 43650 Form “A”), MINI and 9.4mm (Industry Standard) and 8mm Sub-Micro (DIN 43650 “C”) solenoid connections to 8mm or 12mm (round) circular connectors. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile “straight line” interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating, is far better for environmental integrity than field wire versions and makes it impossible to lose the gasket! The 5FFAC and 5JFAC are the only molded valve connectors in the industry that feature bi-directional indicator lights and load suppression (not intended for UL 1449). UL and CSA versions are available as well. The Series 5FFAC is proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3034/5ffac-molded-din-connector
1 Comment | tags: DIN 4360 Form "C", DIN 43650, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, IP67, M12 adapter, M12 connector, molded din 43650, NEMA 6 | posted in DIN 43650 Solenoid Valve Connectors, M12 Round Connector
You must be logged in to post a comment.