Series CS Cylindrical Threaded Mount Sensor

The Canfield Connector Series CS Cylindrical Threaded Mount Sensor is a rugged and compact magnetic sensor set within a miniature encapsulated Stainless Steel M8 threaded housing.  Available in reed or electronic sensing, the CS sensor can sense magnets or magnetic objects in industrial machinery and mobile equipment.  Typically used where greater sensing distance is required, the CS sensor changes state in the presence of a magnetic field.  Electrical output for the CS is normally open, with sinking or sourcing outputs for the electronic versions.  Input voltages available are 0 to 120 VAC/DC .5 Amp maximum for the reed and 5-24 VDC 0.2 Amp maximum for the electronic versions.  The sensor is made of a Stainless Steel  body, TPU encapsulant and has PVC wire standard and is NEMA 6.  Temperature ranges are -20° to 80°C.  The CS Series is proudly made in the U.S.A.

 

See more at:  http://www.canfieldconnector.com/products/category/82/all-threaded-magnetic-sensors

 

Download our free app on any iOS or Android device!

 

8mm Female Molded Locking Connector

M8, 8mm Female Molded Locking Euro-style solenoid and sensor round connectors feature metric locking, and are used for factory automation, commercial electronics, process control, and industrial instrumentation. Available in 3 pin or 4 pin, 120V AC/DC,  4 Amps max.

 

See more at:  http://www.canfieldconnector.com/products/series/3048/8mm-female-molded-locking

 

Download our free app on any iOS or Android device!

9D – Fabco, Numatics, Rotomation Grooves

The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.

 

See more at:  http://www.canfieldconnector.com/products/series/3014/9d-reed-electronic-cylinder-proximity-sensor

 

Fieldbus Adapter DIN 43650 Solenoid Valve Connectors

DIN 43650 / ISO 4400 / EN175301-803:2000 Molded Female Electrical Connectors for Solenoid valves that are designed using M12 and M8 round male connectors to be quickly installed in fieldbus distribution blocks.  The connectors are available in sizes: Form A, Form B and Form C versions as well as the MINI 22 mm and Sub-Micro 9 mm industry standard configurations.  Configurations include plain, lighted, surge suppressed versions for machine protection and indication troubleshooting.

See more at:  http://www.canfieldconnector.com/products/category/78/fieldbus-adapter-din-43650-solenoid-valve-connectors

Download our free app now available for any iOS or Android device!

5JMSD – In-line Micro Solenoid Driver Molded Connectors

The Canfield Connector Series 5JMSD is a solenoid driver circuit (Coil Saver) tucked away in our all new in-line electronics package coupled with our 5J all-molded DIN solenoid valve connector/gasket/cord assembly for DIN 43650 Form A, Industry and Form C Solenoid Valve Connectors (EN 175301-803-2000 ). The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The Coil Saver enhances solenoid valve function as it lowers the wattage of solenoid operators of solenoid valves as it first applies a full voltage to ensure strong pull-in then drops the current when the solenoid magnetic circuit is most efficient and lowers wattage during long term energization or repeated cycles and lower RMS wattage. Both the in-line Coil Saver package and the 5J are fully encapsulated enclosures. This design allows for the Coil Saver to be isolated from the heat of the solenoid as well as installed upstream, away from the coil connector that is designed for this heat.  The DC voltage version is 46mm by 15mm cylinder and is IP68 fully sealed from dust and water ingress.  The in-line package can control input DC voltage and supplies PWM DC to the coil. The Series 5JMSD is Proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3060/5jmsd—in-line-micro-solenoid-driver-molded-connectors

 

Series 7C Hugh Current Proximity Sensor

The Canfield Series 7C proximity sensors are used to sense position on pneumatic actuators equipped with magnetic pistons from 2″ to 8″ bore. This proven design is rugged yet cost effective. All switches feature a self-adjusting clamp that grips standard NFPA and custom cylinders eliminating stocking requirements of many clamps for different bore sizes. The Series 7C boasts the largest number of custom circuits to match applications found in the market. Examples include; 1 or 4 Amp reed switches, normally open, normally closed or SPDT switch types, reed or electronic sensing elements in the same package style, not to mention the industry’s first 120 VAC Hall sensor. The low cost 7C features a ½” conduit hub and wire lead to meet stringent electrical codes in certain regions and applications.

See more at:  http://www.canfieldconnector.com/products/series/3004/7c-reed-electronic-cylinder-proximity-sensor

Download our free app on any iOS or Android device!

Series MBT – 12 Functions in 1 Multifunction Block Timer

The Canfield Connector model MBT Multifunction Block Timer is designed as a full featured multiple mode of operation, multiple voltage, all-in-one timer. The unit is offered in a small epoxy encapsulated housing with on board mode switches and adjustments. The unit has a time range adjustable from 0.1 seconds to 33.3 hours. Features include twelve modes of operation including a multitude of logic function possibilities and an indicator light for fast troubleshooting. The unit can be used to trigger another MBT in a cascade type arrangement, to meet complex functions or longer time ranges. With a voltage range of 12-240 VDC / 24-240 VAC 50/60 Hz, the MBT can instantly handle all mobile, industrial and automation applications right off the shelf. Each timer is 100% tested for function and quality and is resistant to dust, vibration and humidity. Mounting is accomplished by use of a through hole able to accommodate up to a 6mm diameter screw. Electrical connections are .250″ AMP Fasten posts for crimp type push-on connectors.

See more at:  http://www.canfieldconnector.com/products/series/3031/mbt

Download our free Canfield Connector app on any iOS or Android device!

Series 5JR – Rectified, Lighted, Suppressed

The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector.  The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking.  Also, direct current eliminates AC “hum” inherent to alternating current.  Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility.  The low profile 90° interface/cord configuration allows for installation in many limited space applications.  The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket!  Features load suppression (not intended for UL 1449).  The Series 5JR is Proudly Made in the U.S.A.

See more at:  http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector

Download our free app on any iOS or Android device!

Series 8F Magnetic Reed Type Proximity Sensor

The Canfield Connector Series 8F is a compact yet rugged magnetic reed type proximity sensor designed for rigorous applications where critical magnetic sensing is needed. The tough nylon shell is over-molded with polyurethane to create an environmentally resilient seal from the elements and is rated to IP67. The compact size and cylindrical shape are ideal for mounting in a simple hole or cylindrical shape. There is a tab mounting version also available. The 8F can be mounted solidly and fit into many common magnetic sensing applications. Offered standard with 9ft. cord or an M8 quick connect connector, the switch is also available in either normally open or normally closed switch types.

See more at:  http://www.canfieldconnector.com/products/series/3010/8f-reed-cylinder-proximity-sensor

Download our free Canfield Connector app on any iOS or Android device!

Series ILW-Interposed Lighted Wafer Indicator Light

The Canfield Connector Interposed Lighted Wafer is an electronic, state of the art lighting module designed to install between a DIN type coil and the mating connector. Utilizing SMT (Surface Mount Technology), the iLW’s ultra-thin design and high luminescence Gallium Arsenide LEDs enable the lighted wafer to retrofit existing applications or to be used in conjunction with unlighted connectors. Designed to “sandwich” between the connector and the coil, the iLW seals from dust and moisture. The iLW can be installed several times without degradation of the contact surfaces and is not polarity dependent

Watch our YouTube video:  https://www.youtube.com/watch?v=GBT__pFZca0

See more at:  http://www.canfieldconnector.com/products/series/3041/ilw-electronic-lighted-din-connector-module