Tag Archives: dovetail
The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.
See more at: http://www.canfieldconnector.com/products/series/3014/9d-reed-electronic-cylinder-proximity-sensor
Leave a comment | tags: 8mm quick connect, cylinder proximity sensor, dovetail, dovetail slot, electronic magnetic sensor, Fabco, IP67, LED, linear magnetic position sensor, magnetic cylinder switches, magnetic pistons, magnetic proximity sensor, magnetic proximity switch, Magnetic Sensor, magnetic sensors, NEMA 6, NFPA, NFPA tie rod linear actuators, NPN, Numatics, Numatics grooves, pigtail, PNP, Proximity sensors, quick connect, reed magnet, Reed sensor, Reed Switch, Rotomation, sinking, solid state sensor, sourcing, switches, tie-rod, tie-rod cylinder, tie-rod sensor | posted in Magnetic Cylinder Proximity Sensors, magnetic cylinder sensor
The Canfield Connector Series 8WS reed and electronic magnet sensors are rugged yet compact switches used to sense position on pneumatic actuators equipped with a magnetic piston and 12mm dovetail groove. The switch can be slipped in and tightened from anywhere along the groove that is fabricated into the cylinder wall or clamping system. The switch features a die cast holder which clamps to the cylinder groove while the electronics are fully encapsulated and resistance to environment. These sensors offer a wide voltage range from 0-120 V AC/DC 50/60Hz and have a up to a 500 mA switching current rating. The switch has a high intensity indicator light which indicates power to the switch and load. The switch comes standard with 9 ft. PVC or 8mm quick connect male pigtail.
See more at: http://www.canfieldconnector.com/products/series/3011/8ws-reed-electronic-cylinder-proximity-magnetic-cylinder-sensor
Leave a comment | tags: 8mm quick connect, dovetail, dovetail slot, electronic magnetic sensor, electronic sensor, IP67, LED, magnetic sensors, male pigtail, MOV, NEMA 6, Numatics, Numatics grooves, pneumatic actuator, pneumatic cylinder, quick connect, reed magnet, Reed sensor, Reed Switch, worldswitch | posted in magnetic cylinder sensor
The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged, fully encapsulated switch is shipped with mounting hardware ready for installation.
Leave a comment | tags: 8mm quick connect, dovetail, dovetail slot, electronic sensor, Fabco, IP67, magnetic proximity sensor, magnetic proximity switch, Magnetic Sensor, NEMA 6, Numatics, reed magnet, Reed sensor, Reed Switch, Rotomation, round cylinder, solid state sensor, tie-rod, tie-rod cylinder, tie-rod sensor | posted in Magnetic Cylinder Proximity Sensors, magnetic cylinder sensor
Leave a comment | tags: 1/2", 1/2" conduit, 5F, 8F, 8mm 1/2" Conduit, 8mm quick connect, 8mm Strain Relief, 8wf, adjustable amplitude, adjustable current output, air dryers, aircraft aluminum, ASCO, Bimba, Block Micro Proportional Driver, CanTop, coil pin protector, Compact Air, Condensation Removal Timer, connector, connectors, Control current, control signal input, Control Voltage, conveyor automation, cord grip, crimping, crimping force sensor, cycle time, cycle timer, Cylinder Sensor, cylinders, DCP, DE-STA-CO, Delay On Make, differential pressure switch, Diffused Accumulation, diffused indexing, DIN, DIN 4360 Form "C", DIN 43650, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, DIN 43650 Form "C", DIN Form "C", DIN43650, Diode, dovetail, dual spade, electronic magnetic sensor, electronic sensor, EN175301, epoxy potted enclosure, extruded cylinder, Fabco, FAC, Fieldbus Adapber, Fieldbus Adapter, Flex, Flex Strain Relief Connector, flow control, force feedback, force sensor, Form A, Form B, Form C, full-wave bridge rectifier, Gemu, General Location, Goyen Valve, Hard Usage, hazardous location, Heyco, Hubbell, hydraulic coils, iLW, intercooler, Interval Delay, Intrinsically safe, IP 65, IP65, IP67, ISO, ISO 4400, ISO Male, LED, lighted, Linear Actuator, linear actuator switches, M12, M12 adapter, M12 connector, M8, magnetic, magnetic pistions, magnetic pistons, magnetic proximity sensor, magnetic proximity switch, Magnetic Sensor, Male Connector, male patch cord, male pigtail, Manual override, Micro Logic Timer, Micro Proportional Driver, Micro Solenoid Driver, MINI, MINI Male, molded, molded connector, MOV, MPD, Multifunction block timer, Multiple Control Connector, multiple voltage, NEMA 1, NEMA 13, NEMA 4, NEMA 6, NEMA4, NEMA6, NFPA tie rod linear actuators, Nitrile, Norgren, normally closed, NPN, NPT, NPT 3/4", NPT 3/8", Numatics, Off Delay, On Delay, Optical sensor valve, parallel, Parallel Control, Parker, PG11, PG9, photo eye accumulation system, pneumatic actuator, pneumatic cylinder, PNP, Power Converter, Proximity Sensor, Proximity sensors, PUR, PVC, PVC jacket, PWM, PWM Frequency, quick connect, Rectified, Reed sensor, Reed Switch, Retro-Reflective Accumulation, retro-reflective indexing, Robohand, robotic force sensor, robotics, Rotomation, round, round connectors, round cylinder, round groove, Sealcon, sense gripper force, sensors, Separate Control, Series 7000, shock resistant, Silicone, Simultaneous Solenoid Operation, sine wave dithering, single cycle timer, sinking, SJTOW, SJTOW jacket, slug, SMC, solenoid valve, solenoid valve connector, solid state electronic timing unit, solid-state, sourcing, spot welding, spot welding sensor, square wave cycle timer, Strain Relief, Strain Relief Connector, Sub-Micro, surge suppression, swaging, swaging force sensor, tactile end of stroke pneumatic hydraulic sensor, tactile sensor, tactile snsor, tie rod cylinders, tie-rod, tie-rod cylinder, time delay, timer, TMLT, universal application, universal applications, w, washdown resistant, Wire Strain Relief | posted in Cable Gland, CanTop Wire Strain Reliefs, Conveyor Controls, DIN 43650 Solenoid Valve Connectors, DIN 43650 to M12, Fieldbus Adapter Cables, M12 Round Connector, Magnetic Cylinder Proximity Sensors, magnetic cylinder sensor, proportional controller, Round Connectors, Timers, Proportional And Electronic Circuits, Wire Strain Relief Connectors
The Canfield Connector Series 9E is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged 20% glass-filled polypropylene switch is shipped with mounting hardware ready for installation.
Leave a comment | tags: dovetail, electronic sensor, Fabco, IP67, magnetic proximity sensor, male pigtail, NEMA 6, Numatics, quick connect, Reed sensor, Reed Switch, Rotomation, tie-rod, universal application | posted in Magnetic Cylinder Proximity Sensors
The Canfield Connector Series 9D is a universal, ultra-small, magnetic proximity switch available in both solid state electronic and reed styles. These sensors are designed to fit the most stringent space requirements by use of a standard .250 inch dovetail slot. Many other mounting options are also available. The electronic sensor exhibits greater sensitivity to magnetism with reduced dead-band and hysteresis as compared to competitive devices. The reed sensor offers a wide operating voltage range. The molded switch has an on board indicator light that can be viewed from wide angles. Standard connection to the sensor is provided by a 9 ft. PVC or 8mm quick connect male pigtail. The rugged 20% glass-filled polypropylene switch is shipped with mounting hardware ready for installation.
Leave a comment | tags: dovetail, electronic sensor, Fabco, Intrinsically safe, IP67, male pigtail, NEMA 6, Numatics, quick connect, Reed sensor, Reed Switch, Rotomation, solid-state, universal applications | posted in Magnetic Cylinder Proximity Sensors
The Canfield Connector Series 8WS reed and electronic magnet sensors are rugged yet compact switches used to sense position on pneumatic actuators equipped with a magnetic piston and 12mm dovetail groove. The switch can be slipped in and tightened from anywhere along the groove that is fabricated into the cylinder wall or clamping system. The switch features a die cast holder which clamps to the cylinder groove while the electronics are fully encapsulated and resistance to environment. These sensors offer a wide voltage range from 0-120 V AC/DC 50/60Hz and have a up to a 500 mA switching current rating. The switch has a high intensity indicator light which indicates power to the switch and load. The switch comes standard with 9 ft. PVC or 8mm quick connect male pigtail.
Leave a comment | tags: dovetail, electronic sensor, IP67, magnet, Magnetic Sensor, NEMA 6, Numatics, pneumatic, pneumatic actuator, pneumatic cylinder, Reed sensor, Reed Switch, rugged, world switch, worldswitch | posted in Magnetic Cylinder Proximity Sensors
Canfield Connector 
You must be logged in to post a comment.