Tag Archives: MOV
The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile 90° interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features load suppression (not intended for UL 1449). The Series 5JR is Proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector
Download our free app on any iOS or Android device!
Leave a comment | tags: connector, connectors, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", full-wave bridge rectifier, IP67, ISO, LED, lighted, load suppression, Male Connector, MINI, molded connector, molded din 43650, molded plug, molded valve connectors, MOV, NEMA 6, polyurethane encapsulation, Rectified, solenoid valve connector, Sub-Micro, surge suppression | posted in DIN 43650 Solenoid Valve Connectors, Rectified DIN 43650
This Canfield Connector miniature timer makes any valve, with the DIN 43650 Form “A”/ISO 4400, EN175301-803:2000 electrical interface, able to operate as a compressed air system condensate removal valve. The unit installs in a modular form between an existing coil and connector. No new wiring is necessary. Retrofits on virtually any installation. It works with the valve brand of your choice. The cycle and on times are easily adjustable and two indicator lights show status.
See more at: http://www.canfieldconnector.com/products/series/3028/sandwich-crt
Download our free app on any iOS or Android device!
Leave a comment | tags: 1/2" conduit, air compressor condensation, compressed air system, compressor timer, condensation removal, Condensation Removal Timer, cycle time, cycle timer, DIN 43650 Form "A", Diode, ISO, ISO 4400, Manual override, MOV, on time, sandwich timer, solenoid valve timer, solid state electronic timing unit, solid-state, timer, timer connector, timers and controls | posted in timer, Timers, Proportional And Electronic Circuits
The Micro Protective Connectors are available in standard MINI, DIN 43650 Form “A” / ISO 4400, EN175301-803:2006 and Sub-Micro 8mm and 9.4mm. The Canfield Connector MPCs provide electrical controllers surge suppression against voltage spikes caused by the solenoids used on hydraulic and pneumatic solenoid valves.
See more at: http://www.canfieldconnector.com/products/series/3058/p5600-din43650–surge-suppression
Leave a comment | tags: DIN 43650 Form "A", DIn 43650 Form "B", DIN 43650 Form "C", Diode, field wireable connector, IP65, ISO, MINI, MOV, NEMA 4, solenoid valve connector, Sub-Micro, surge suppression | posted in DIN 43650 Solenoid Valve Connectors
The CAN-SAK point of purchase display features a popular variety of individually bagged, 5J fully molded connectors which mate to your standard solenoid valves. The three tier 360° rotating 5 Ft. display rack along with the individually packaged clear hanging bag allows for easy vision to see what your buying. Easy markings on bags and boxes help identify the product to fit your needs. The product sells itself! Grab and Go!
See more at: http://www.canfieldconnector.com/products/category/80/can-sak-point-of-purchase-rack
Or download our free app on any iOS or Android device:
https://itunes.apple.com/us/app/canfield-connector-mobile/id1167616267?ls=1&mt=8
https://play.google.com/store/apps/details?id=com.canfieldindustries.canfieldconnector&hl=en
Leave a comment | tags: connector, connectors, IP67, LED, molded, molded connector, molded din 43650, molded plug, MOV, NEMA 6, solenoid valve connector, UL | posted in DIN 43650 Solenoid Valve Connectors, Male DIN43650
This Canfield Connector miniature timer makes any valve, with the DIN 43650 Form “A”/ISO 4400, EN175301-803:2000 electrical interface, able to operate as a compressed air system condensate removal valve. The unit installs in a modular form between an existing coil and connector. No new wiring is necessary. Retrofits on virtually any installation. It works with the valve brand of your choice. The cycle and on times are easily adjustable and two indicator lights show status.
See more at: http://www.canfieldconnector.com/products/series/3028/sandwich-crt
Leave a comment | tags: air compressor condensation, condensation removal, Condensation Removal Timer, cycle time, cycle timer, DIN 43650, DIN 43650 Form "A", Diode, ISO, Manual override, MOV, Off Delay, On Delay, on time, solid state electronic timing unit, solid state timer, solid-state, universal timers | posted in timer, Timers, Proportional And Electronic Circuits
The Canfield Connector Series 8WS reed and electronic magnet sensors are rugged yet compact switches used to sense position on pneumatic actuators equipped with a magnetic piston and 12mm dovetail groove. The switch can be slipped in and tightened from anywhere along the groove that is fabricated into the cylinder wall or clamping system. The switch features a die cast holder which clamps to the cylinder groove while the electronics are fully encapsulated and resistance to environment. These sensors offer a wide voltage range from 0-120 V AC/DC 50/60Hz and have a up to a 500 mA switching current rating. The switch has a high intensity indicator light which indicates power to the switch and load. The switch comes standard with 9 ft. PVC or 8mm quick connect male pigtail.
See more at: http://www.canfieldconnector.com/products/series/3011/8ws-reed-electronic-cylinder-proximity-magnetic-cylinder-sensor
Leave a comment | tags: 8mm quick connect, dovetail, dovetail slot, electronic magnetic sensor, electronic sensor, IP67, LED, magnetic sensors, male pigtail, MOV, NEMA 6, Numatics, Numatics grooves, pneumatic actuator, pneumatic cylinder, quick connect, reed magnet, Reed sensor, Reed Switch, worldswitch | posted in magnetic cylinder sensor
The Canfield Series 5JR solenoid valve connectors incorporate a full-wave bridge rectifier inside a fully molded connector. The 5JR converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Made from rugged yet flexible polyurethane, the connector housing boasts high durability factors and application versatility. The low profile 90° interface/cord configuration allows for installation in many limited space applications. The integrated gasket design boasts an IP67/NEMA 6 rating and makes it impossible to lose the gasket! Features load suppression (not intended for UL 1449). The Series 5JR is Proudly Made in the U.S.A.
See more at: http://www.canfieldconnector.com/products/series/3037/5jr-molded-din-connector
Leave a comment | tags: DIN 43650 Form "A", DIN 43650 Form "A" for Molding, DIn 43650 Form "B", full-wave bridge rectifier, integrated gasket, IP67, ISO, lighted, load suppression, molded connector, molded din 43650, molded plug, MOV, NEMA 6, Rectified, solenoid valve connector, surge suppression | posted in DIN 43650 Solenoid Valve Connectors, Rectified DIN 43650
The Canfield Connector 7HL is a rugged magnetic proximity sensor designed to sense actuator position in stringent, hazardous location applications. The switch features a robust, epoxy-filled, aircraft aluminum body, and has a vibration and shock resistant, electronic circuit. The 7HL is an expansion of the popular Series 7000 “floating” clamp design and will clamp on 2 to 8 inch bore NFPA tie rod linear actuators. This product is designed to operate in hazardous locations, this switch is CSA approved for Class I, Division 2, Groups A, B, C, and D; Class II, Division 2, Groups F and G; and Class III.
See more at:
http://www.canfieldconnector.com/products/series/3005/7hl-hazardous-location-proximity-sensor
Leave a comment | tags: Class I, Class II, Class III, CSA, CSA approved, Division 2, Explosion proof, hazardous location, IP65, IP67, Linear Actuator, magnetic proximity sensor, magnetic proximity switch, MOV, NEMA 4, NEMA 6, NFPA tie rod linear actuators, Reed sensor, Reed Switch, surge suppression, washdown resistant | posted in Magnetic Cylinder Proximity Sensors, magnetic cylinder sensor
Leave a comment | tags: 1/2", 1/2" conduit, 5F, 8F, 8mm 1/2" Conduit, 8mm quick connect, 8mm Strain Relief, 8wf, adjustable amplitude, adjustable current output, air dryers, aircraft aluminum, ASCO, Bimba, Block Micro Proportional Driver, CanTop, coil pin protector, Compact Air, Condensation Removal Timer, connector, connectors, Control current, control signal input, Control Voltage, conveyor automation, cord grip, crimping, crimping force sensor, cycle time, cycle timer, Cylinder Sensor, cylinders, DCP, DE-STA-CO, Delay On Make, differential pressure switch, Diffused Accumulation, diffused indexing, DIN, DIN 4360 Form "C", DIN 43650, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, DIN 43650 Form "C", DIN Form "C", DIN43650, Diode, dovetail, dual spade, electronic magnetic sensor, electronic sensor, EN175301, epoxy potted enclosure, extruded cylinder, Fabco, FAC, Fieldbus Adapber, Fieldbus Adapter, Flex, Flex Strain Relief Connector, flow control, force feedback, force sensor, Form A, Form B, Form C, full-wave bridge rectifier, Gemu, General Location, Goyen Valve, Hard Usage, hazardous location, Heyco, Hubbell, hydraulic coils, iLW, intercooler, Interval Delay, Intrinsically safe, IP 65, IP65, IP67, ISO, ISO 4400, ISO Male, LED, lighted, Linear Actuator, linear actuator switches, M12, M12 adapter, M12 connector, M8, magnetic, magnetic pistions, magnetic pistons, magnetic proximity sensor, magnetic proximity switch, Magnetic Sensor, Male Connector, male patch cord, male pigtail, Manual override, Micro Logic Timer, Micro Proportional Driver, Micro Solenoid Driver, MINI, MINI Male, molded, molded connector, MOV, MPD, Multifunction block timer, Multiple Control Connector, multiple voltage, NEMA 1, NEMA 13, NEMA 4, NEMA 6, NEMA4, NEMA6, NFPA tie rod linear actuators, Nitrile, Norgren, normally closed, NPN, NPT, NPT 3/4", NPT 3/8", Numatics, Off Delay, On Delay, Optical sensor valve, parallel, Parallel Control, Parker, PG11, PG9, photo eye accumulation system, pneumatic actuator, pneumatic cylinder, PNP, Power Converter, Proximity Sensor, Proximity sensors, PUR, PVC, PVC jacket, PWM, PWM Frequency, quick connect, Rectified, Reed sensor, Reed Switch, Retro-Reflective Accumulation, retro-reflective indexing, Robohand, robotic force sensor, robotics, Rotomation, round, round connectors, round cylinder, round groove, Sealcon, sense gripper force, sensors, Separate Control, Series 7000, shock resistant, Silicone, Simultaneous Solenoid Operation, sine wave dithering, single cycle timer, sinking, SJTOW, SJTOW jacket, slug, SMC, solenoid valve, solenoid valve connector, solid state electronic timing unit, solid-state, sourcing, spot welding, spot welding sensor, square wave cycle timer, Strain Relief, Strain Relief Connector, Sub-Micro, surge suppression, swaging, swaging force sensor, tactile end of stroke pneumatic hydraulic sensor, tactile sensor, tactile snsor, tie rod cylinders, tie-rod, tie-rod cylinder, time delay, timer, TMLT, universal application, universal applications, w, washdown resistant, Wire Strain Relief | posted in Cable Gland, CanTop Wire Strain Reliefs, Conveyor Controls, DIN 43650 Solenoid Valve Connectors, DIN 43650 to M12, Fieldbus Adapter Cables, M12 Round Connector, Magnetic Cylinder Proximity Sensors, magnetic cylinder sensor, proportional controller, Round Connectors, Timers, Proportional And Electronic Circuits, Wire Strain Relief Connectors
Canfield Connector’s R5000 Series solenoid valve connectors incorporate full-wave bridge rectifiers inside the DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 connectors. This standard permits industry interchange-ability and has been embraced by the solenoid valve industry worldwide. The R5000 converts alternating current to direct current reducing coil burnout due to valve sticking. Also, direct current eliminates AC “hum” inherent to alternating current. Features include the ability for the user to wire the connector into existing installations. Wire connections are made inside the connector housing and the wire inlet is either PG9 strain relief, 3/8″ or 1/2″ conduit. The R5000 has a maximum current rating of 1 Amp continuous with maximum wire gauge diameter of 14 AWG. An indicator light is offered for instant diagnostics and to aid setup and installation.
See more at:
http://www.canfieldconnector.com/products/series/3036/r5000-din43650-rectified-solenoid-valve-connector
Leave a comment | tags: connectors, DIN 43650, DIN 43650 Form "A", DIN43650, Diode, electronic sensor, Form A, IP65, ISO, ISO 4400, MINI, molded, MOV, NEMA 4, NEMA 6, Numatics, PG9, quick connect, Strain Relief, surge suppression, washdown resistant | posted in DIN 43650 Solenoid Valve Connectors, Rectified DIN 43650
Canfield Connector 
You must be logged in to post a comment.