Tag Archives: Micro Logic Timer
The Canfield Connector TMLT is an ultra-compact all solid state timer incorporated into a vibration and environment resistant composite encapsulant housing. The heart of the timer is a powerful microprocessor that is made in quantity then programmed to become the timer type according to customer specification. Featuring 6 timer modes of operation with two voltage ranges; 12-240V AC/DC or 12-60 VDC and four output options; Sinking ON First, Sinking OFF First, Sourcing ON First, and Sourcing OFF First, and 13 time ranges, from 0.1 to 2000 seconds. The timer is available with screwdriver or hand adjustment, and troubleshooting is a breeze with the on board indicator light. The TMLT is versatile as well as rugged, and each timer is 100% tested, made in America and resistant to dust, vibration and humidity. Mounting is accomplished by use of a through hole able to accommodate up to a 1/4″ (6mm) screw or by use of a DIN rail mount adapter plate. Electrical connections are .250″ AMP Faston posts for crimp type push-on connectors.
See more at: http://www.canfieldconnector.com/products/series/3032/tmlt
And download our free app on any iOS or Android device!
Leave a comment | tags: block, block timer, cycle timer, delay on break, Delay On Make, Micro Logic Timer, Multifunction block timer, NEMA 1, Off Delay, On Delay, single cycle timer, sinking, solid state electronic timing unit, solid state timer, solid-state, sourcing, square wave, square wave cycle timer, timer, timers and controls, TMLT | posted in timer, Timers, Proportional And Electronic Circuits
The Canfield Connector micro logic timer is a solid state electronic timing unit incorporated inside the standard MINI and DIN 43650 Form “A” / ISO 4400, EN 175301-
803:2000 electrical connectors. The MLT allows precise timing and logic functions in a small, easily mounted enclosure. there are eight standard timer types.
Each timer incorporates circuitry for AC or DC operation with a wide voltage range.
See more at: http://www.canfieldconnector.com/products/series/3025/5800-connector-timer-solenoid-valve-din-43650-iso
Leave a comment | tags: cycle time, cycle timer, delay on break, Delay On Make, DIN 43650, DIN 43650 Form "A", DIn 43650 Form "B", encapsulated timing module, internal timer circuit, Interval Delay, IP 65, IP65, ISO, ISO 4400, logic trigger, Micro Logic Timer, MINI, NEMA 4, Off Delay, On Delay, single cycle timer, solid state electronic timing unit, solid-state, square wave, square wave cycle timer, time delay, Time Delay Relay, timer, timer connector, timers and controls | posted in Time Delay Relay, timer, Timers, Proportional And Electronic Circuits
The Canfield Connector micro logic timer is a solid state electronic timing unit incorporated inside the standard MINI and DIN 43650 Form “A” / ISO 4400, EN 175301-
803:2000 electrical connectors. The MLT allows precise timing and logic functions in a small, easily mounted enclosure. there are eight standard timer types.
Each timer incorporates circuitry for AC or DC operation with a wide voltage range.
see more at: http://www.canfieldconnector.com/products/series/3025/5800-connector-timer-solenoid-valve-din-43650-iso
Leave a comment | tags: built-in timer, DIN 43650, Form A, Form B, IP65, Micro Logic Timer, NEMA 4, solid-state, surge suppression, timer, timer connector | posted in DIN 43650 Solenoid Valve Connectors, Timers, Proportional And Electronic Circuits
Leave a comment | tags: 1/2", 1/2" conduit, 5F, 8F, 8mm 1/2" Conduit, 8mm quick connect, 8mm Strain Relief, 8wf, adjustable amplitude, adjustable current output, air dryers, aircraft aluminum, ASCO, Bimba, Block Micro Proportional Driver, CanTop, coil pin protector, Compact Air, Condensation Removal Timer, connector, connectors, Control current, control signal input, Control Voltage, conveyor automation, cord grip, crimping, crimping force sensor, cycle time, cycle timer, Cylinder Sensor, cylinders, DCP, DE-STA-CO, Delay On Make, differential pressure switch, Diffused Accumulation, diffused indexing, DIN, DIN 4360 Form "C", DIN 43650, DIN 43650 Form "A", DIN 43650 Form "A" for Molding, DIN 43650 Form "C", DIN Form "C", DIN43650, Diode, dovetail, dual spade, electronic magnetic sensor, electronic sensor, EN175301, epoxy potted enclosure, extruded cylinder, Fabco, FAC, Fieldbus Adapber, Fieldbus Adapter, Flex, Flex Strain Relief Connector, flow control, force feedback, force sensor, Form A, Form B, Form C, full-wave bridge rectifier, Gemu, General Location, Goyen Valve, Hard Usage, hazardous location, Heyco, Hubbell, hydraulic coils, iLW, intercooler, Interval Delay, Intrinsically safe, IP 65, IP65, IP67, ISO, ISO 4400, ISO Male, LED, lighted, Linear Actuator, linear actuator switches, M12, M12 adapter, M12 connector, M8, magnetic, magnetic pistions, magnetic pistons, magnetic proximity sensor, magnetic proximity switch, Magnetic Sensor, Male Connector, male patch cord, male pigtail, Manual override, Micro Logic Timer, Micro Proportional Driver, Micro Solenoid Driver, MINI, MINI Male, molded, molded connector, MOV, MPD, Multifunction block timer, Multiple Control Connector, multiple voltage, NEMA 1, NEMA 13, NEMA 4, NEMA 6, NEMA4, NEMA6, NFPA tie rod linear actuators, Nitrile, Norgren, normally closed, NPN, NPT, NPT 3/4", NPT 3/8", Numatics, Off Delay, On Delay, Optical sensor valve, parallel, Parallel Control, Parker, PG11, PG9, photo eye accumulation system, pneumatic actuator, pneumatic cylinder, PNP, Power Converter, Proximity Sensor, Proximity sensors, PUR, PVC, PVC jacket, PWM, PWM Frequency, quick connect, Rectified, Reed sensor, Reed Switch, Retro-Reflective Accumulation, retro-reflective indexing, Robohand, robotic force sensor, robotics, Rotomation, round, round connectors, round cylinder, round groove, Sealcon, sense gripper force, sensors, Separate Control, Series 7000, shock resistant, Silicone, Simultaneous Solenoid Operation, sine wave dithering, single cycle timer, sinking, SJTOW, SJTOW jacket, slug, SMC, solenoid valve, solenoid valve connector, solid state electronic timing unit, solid-state, sourcing, spot welding, spot welding sensor, square wave cycle timer, Strain Relief, Strain Relief Connector, Sub-Micro, surge suppression, swaging, swaging force sensor, tactile end of stroke pneumatic hydraulic sensor, tactile sensor, tactile snsor, tie rod cylinders, tie-rod, tie-rod cylinder, time delay, timer, TMLT, universal application, universal applications, w, washdown resistant, Wire Strain Relief | posted in Cable Gland, CanTop Wire Strain Reliefs, Conveyor Controls, DIN 43650 Solenoid Valve Connectors, DIN 43650 to M12, Fieldbus Adapter Cables, M12 Round Connector, Magnetic Cylinder Proximity Sensors, magnetic cylinder sensor, proportional controller, Round Connectors, Timers, Proportional And Electronic Circuits, Wire Strain Relief Connectors
The Canfield Connector Micro Logic Timer is a solid state electronic timing unit incorporated inside the standard MINI and DIN 43650 Form “A” / ISO 4400, EN175301-803:2000 electrical connectors. The MLT allows precise timing and logic functions in a small, easily mounted enclosure. There are eight standard timer types. Each timer incorporates circuitry for AC or DC operation with a wide voltage range.
Leave a comment | tags: cycle timer, Delay On Make, DIN 43650 Form "A", Interval Delay, IP 65, ISO 4400, Micro Logic Timer, MINI, NEMA 4, Off Delay, On Delay, single cycle timer, solid state electronic timing unit, square wave cycle timer, timer | posted in Timers, Proportional And Electronic Circuits
Canfield Connector 
You must be logged in to post a comment.